New Search

If you are not happy with the results below please do another search

8 search results for: Blunami

1

BLUNAMI BLU-2200 (2-amp) Digital Sound Decoder Tsunami2 Electric, 6-Function, Universal – #678-886602

The Blunami BLU-2200
The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. This decoder is suitable for use in both HO and small S-scale models. Wireless mode not currently available for android devices.

DYNAMIC DIGITAL EXHAUST 
For added realism, you’ll love our reactive Dynamic Digital Exhaust (DDE) feature that automatically notches your models engine up or down depending on the load on the motor. With the Blunami App, DDE calibration has never been easier. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Blunami the ability to create the most realistic experience possible.

HIGH QUALITY SOUND LIBRARY
Our large selection of high quality sound effects include:

  • 10 Exhaust Chuffs
  • Up to 12 Prime Movers in each sound profile
  • Up to 12 Bells
  • 90 Whistles
  • 40+ Airhorns
  • Additional couplers, dynamos, cab chatter and more!

ADDED REALISM
Additional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more.

EASY INSTALLATION
The BLU-2200 can simply plug into models equipped with a DCC quick plug. Our 9-Pin JST to NMRA 8-Pin Wiring Harness (P.N. 810135) can also be used to plug the BLU-2200 into models equipped with an NMRA 8-Pin plug. The BLU-2200 can also be wired into a large variety of models.

This 2-amp, universal-style format, and includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.

Dimensions: 41.9 x 18.8 x 6.8mm
Max. Motor Stall Current: 2A
Max. Function Current: 100mA (each output)
Function Outputs: 6
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
2

BLUNAMI BLU-2200 (2-amp) Digital Sound Decoder Tsunami2 Diesel EMD-2 Set, 6-Function, Universal – #678-885622

The Blunami BLU-2200
The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. This decoder is suitable for use in both HO and small S-scale models. Wireless mode not currently available for android devices.

DYNAMIC DIGITAL EXHAUST 
For added realism, you’ll love our reactive Dynamic Digital Exhaust (DDE) feature that automatically notches your models engine up or down depending on the load on the motor. With the Blunami App, DDE calibration has never been easier. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Blunami the ability to create the most realistic experience possible.

HIGH QUALITY SOUND LIBRARY
Our large selection of high quality sound effects include:

  • 10 Exhaust Chuffs
  • Up to 12 Prime Movers in each sound profile
  • Up to 12 Bells
  • 90 Whistles
  • 40+ Airhorns
  • Additional couplers, dynamos, cab chatter and more!

ADDED REALISM
Additional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more.

EASY INSTALLATION
The BLU-2200 can simply plug into models equipped with a DCC quick plug. Our 9-Pin JST to NMRA 8-Pin Wiring Harness (P.N. 810135) can also be used to plug the BLU-2200 into models equipped with an NMRA 8-Pin plug. The BLU-2200 can also be wired into a large variety of models.

This 2-amp, universal-style format, and includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.

Dimensions: 41.9 x 18.8 x 6.8mm
Max. Motor Stall Current: 2A
Max. Function Current: 100mA (each output)
Function Outputs: 6
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
3

BLUNAMI BLU-2200 (2-amp) Digital Sound Decoder Tsunami2 Diesel Baldwin & Others Set, 6-Function, Universal – #678-885608

The Blunami BLU-2200
The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. This decoder is suitable for use in both HO and small S-scale models. Wireless mode not currently available for android devices.

DYNAMIC DIGITAL EXHAUST 
For added realism, you’ll love our reactive Dynamic Digital Exhaust (DDE) feature that automatically notches your models engine up or down depending on the load on the motor. With the Blunami App, DDE calibration has never been easier. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Blunami the ability to create the most realistic experience possible.

HIGH QUALITY SOUND LIBRARY
Our large selection of high quality sound effects include:

  • 10 Exhaust Chuffs
  • Up to 12 Prime Movers in each sound profile
  • Up to 12 Bells
  • 90 Whistles
  • 40+ Airhorns
  • Additional couplers, dynamos, cab chatter and more!

ADDED REALISM
Additional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more.

EASY INSTALLATION
The BLU-2200 can simply plug into models equipped with a DCC quick plug. Our 9-Pin JST to NMRA 8-Pin Wiring Harness (P.N. 810135) can also be used to plug the BLU-2200 into models equipped with an NMRA 8-Pin plug. The BLU-2200 can also be wired into a large variety of models.

This 2-amp, universal-style format, and includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.

Dimensions: 41.9 x 18.8 x 6.8mm
Max. Motor Stall Current: 2A
Max. Function Current: 100mA (each output)
Function Outputs: 6
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
4

BLUNAMI BLU-2200 (2-amp) Digital Sound Decoder Tsunami2 Diesel ALCO Set, 6-Function, Universal – #678-885607

The Blunami BLU-2200
The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. This decoder is suitable for use in both HO and small S-scale models. Wireless mode not currently available for android devices.

DYNAMIC DIGITAL EXHAUST 
For added realism, you’ll love our reactive Dynamic Digital Exhaust (DDE) feature that automatically notches your models engine up or down depending on the load on the motor. With the Blunami App, DDE calibration has never been easier. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Blunami the ability to create the most realistic experience possible.

HIGH QUALITY SOUND LIBRARY
Our large selection of high quality sound effects include:

  • 10 Exhaust Chuffs
  • Up to 12 Prime Movers in each sound profile
  • Up to 12 Bells
  • 90 Whistles
  • 40+ Airhorns
  • Additional couplers, dynamos, cab chatter and more!

ADDED REALISM
Additional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more.

EASY INSTALLATION
The BLU-2200 can simply plug into models equipped with a DCC quick plug. Our 9-Pin JST to NMRA 8-Pin Wiring Harness (P.N. 810135) can also be used to plug the BLU-2200 into models equipped with an NMRA 8-Pin plug. The BLU-2200 can also be wired into a large variety of models.

This 2-amp, universal-style format, and includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.

Dimensions: 41.9 x 18.8 x 6.8mm
Max. Motor Stall Current: 2A
Max. Function Current: 100mA (each output)
Function Outputs: 6
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
5

BLUNAMI BLU-2200 (2-amp) Digital Sound Decoder Tsunami2 Diesel GE Set, 6-Function, Universal – #678-885606

The Blunami BLU-2200
The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. This decoder is suitable for use in both HO and small S-scale models. Wireless mode not currently available for android devices.

DYNAMIC DIGITAL EXHAUST 
For added realism, you’ll love our reactive Dynamic Digital Exhaust (DDE) feature that automatically notches your models engine up or down depending on the load on the motor. With the Blunami App, DDE calibration has never been easier. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Blunami the ability to create the most realistic experience possible.

HIGH QUALITY SOUND LIBRARY
Our large selection of high quality sound effects include:

  • 10 Exhaust Chuffs
  • Up to 12 Prime Movers in each sound profile
  • Up to 12 Bells
  • 90 Whistles
  • 40+ Airhorns
  • Additional couplers, dynamos, cab chatter and more!

ADDED REALISM
Additional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more.

EASY INSTALLATION
The BLU-2200 can simply plug into models equipped with a DCC quick plug. Our 9-Pin JST to NMRA 8-Pin Wiring Harness (P.N. 810135) can also be used to plug the BLU-2200 into models equipped with an NMRA 8-Pin plug. The BLU-2200 can also be wired into a large variety of models.

This 2-amp, universal-style format, and includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.

Dimensions: 41.9 x 18.8 x 6.8mm
Max. Motor Stall Current: 2A
Max. Function Current: 100mA (each output)
Function Outputs: 6
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
Blunami Steam User’s Guide
Blunami Diesel User’s Guide
Blunami Electric User’s Guide
Blunami Sound Selection References:
Blunami Steam-2 Sound Selection Reference
Blunami EMD Sound Selection Reference
Blunami EMD-2 Sound Selection Reference
Blunami GE Sound Selection Reference
Blunami ALCO Sound Selection Reference
Blunami Baldwin & Others Sound Selection Reference
Blunami Electric Sound Selection Reference
Blunami Sound Samples
Blunami Steam-2 Sounds
Blunami EMD
Blunami EMD-2 Sounds
Blunami GE Sounds
Blunami ALCO Sounds
Blunami Baldwin & Other Diesel Sounds
Blunmai Electric Sounds

SoundTraxx

A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer support staff work side-by-side with the rest of our product team.

6

BLUNAMI BLU-2200 (2-amp) Digital Sound Decoder Tsunami2 Steam-2, 6-Function, Universal – #678-884607

The Blunami BLU-2200
The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. This decoder is suitable for use in both HO and small S-scale models. Wireless mode not currently available for android devices.

DYNAMIC DIGITAL EXHAUST 
For added realism, you’ll love our reactive Dynamic Digital Exhaust (DDE) feature that automatically notches your models engine up or down depending on the load on the motor. With the Blunami App, DDE calibration has never been easier. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Blunami the ability to create the most realistic experience possible.

HIGH QUALITY SOUND LIBRARY
Our large selection of high quality sound effects include:

  • 10 Exhaust Chuffs
  • Up to 12 Prime Movers in each sound profile
  • Up to 12 Bells
  • 90 Whistles
  • 40+ Airhorns
  • Additional couplers, dynamos, cab chatter and more!

ADDED REALISM
Additional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more.

EASY INSTALLATION
The BLU-2200 can simply plug into models equipped with a DCC quick plug. Our 9-Pin JST to NMRA 8-Pin Wiring Harness (P.N. 810135) can also be used to plug the BLU-2200 into models equipped with an NMRA 8-Pin plug. The BLU-2200 can also be wired into a large variety of models.

This 2-amp, universal-style format, and includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.

Dimensions: 41.9 x 18.8 x 6.8mm
Max. Motor Stall Current: 2A
Max. Function Current: 100mA (each output)
Function Outputs: 6
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
7

BLUNAMI BLU-2200 (2-amp) Digital Sound Decoder Tsunami2 Diesel EMD Set, 6-Function, Universal – #678-885605

The Blunami BLU-2200
The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. This decoder is suitable for use in both HO and small S-scale models. Wireless mode not currently available for android devices.

DYNAMIC DIGITAL EXHAUST 
For added realism, you’ll love our reactive Dynamic Digital Exhaust (DDE) feature that automatically notches your models engine up or down depending on the load on the motor. With the Blunami App, DDE calibration has never been easier. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Blunami the ability to create the most realistic experience possible.

HIGH QUALITY SOUND LIBRARY
Our large selection of high quality sound effects include:

  • 10 Exhaust Chuffs
  • Up to 12 Prime Movers in each sound profile
  • Up to 12 Bells
  • 90 Whistles
  • 40+ Airhorns
  • Additional couplers, dynamos, cab chatter and more!

ADDED REALISM
Additional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more.

EASY INSTALLATION
The BLU-2200 can simply plug into models equipped with a DCC quick plug. Our 9-Pin JST to NMRA 8-Pin Wiring Harness (P.N. 810135) can also be used to plug the BLU-2200 into models equipped with an NMRA 8-Pin plug. The BLU-2200 can also be wired into a large variety of models.

This 2-amp, universal-style format, and includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.

Dimensions: 41.9 x 18.8 x 6.8mm
Max. Motor Stall Current: 2A
Max. Function Current: 100mA (each output)
Function Outputs: 6
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
8

BLUNAMI BLU-2200 (2-amp) Digital Sound Decoder Tsunami2 Steam-2, 6-Function, Universal – #678-884607

The Blunami BLU-2200
The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. This decoder is suitable for use in both HO and small S-scale models. Wireless mode not currently available for android devices.

DYNAMIC DIGITAL EXHAUST 
For added realism, you’ll love our reactive Dynamic Digital Exhaust (DDE) feature that automatically notches your models engine up or down depending on the load on the motor. With the Blunami App, DDE calibration has never been easier. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Blunami the ability to create the most realistic experience possible.

HIGH QUALITY SOUND LIBRARY
Our large selection of high quality sound effects include:

  • 10 Exhaust Chuffs
  • Up to 12 Prime Movers in each sound profile
  • Up to 12 Bells
  • 90 Whistles
  • 40+ Airhorns
  • Additional couplers, dynamos, cab chatter and more!

ADDED REALISM
Additional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more.

EASY INSTALLATION
The BLU-2200 can simply plug into models equipped with a DCC quick plug. Our 9-Pin JST to NMRA 8-Pin Wiring Harness (P.N. 810135) can also be used to plug the BLU-2200 into models equipped with an NMRA 8-Pin plug. The BLU-2200 can also be wired into a large variety of models.

This 2-amp, universal-style format, and includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.

Dimensions: 41.9 x 18.8 x 6.8mm
Max. Motor Stall Current: 2A
Max. Function Current: 100mA (each output)
Function Outputs: 6
Audio Amplifier: 2 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16