TEMPORARILY OUT OF STOCK – DRS1 MkII 916.49 MHz Receiver – #TVD-DRX021
ONLY 1 LEFT IN STOCK! – ITEM IS NO LONGER AVAILABLE TO PURCHASE FROM TAM VALLEY DEPOT.
DRS1 Receiver, 916.49 MHz, MkII
Receives the wireless DCC signal and creates DCC on-board from a battery to replicate the DCC signal to an existing DCC locomotive decoder. Works with all DCC decoders including sound decoders that need 1.5 Amps or less. Replaces the wires from the wheels.Comes with wiring harness of 26 ga. flexible stranded wire. The antenna can be repositioned by bending to any shape that does not touch itself. There are 2 LED indicators: green indicates power and red indicates the signal strength. Receiver is 34mm x 18mm (1 5/16″ x 3/4″). The unit is 4mm (5/16″) thick. Maximum continuous current is 1.5A continuous, 2A peak.
Note: when removing the wiring harness be sure to pull gently on the plastic connector case with a pair of nippers or sharp tweezers – do not pull the wires or they will come off! Maximum voltage for the battery input is 15V DC – do not exceed! Connecting the battery backward will not do any harm
Out of stock