TEMPORARILY OUT OF STOCK – DRS1 Transmitter, 916.49 MHz, MkII TVD-DTX021
Takes the DCC signal from your existing command station and puts it on the air to be picked up by the receiver(s) in your locomotive(s) (see above). Simply connect to the back of your command station to the rail outputs and place in the center of the room near the ceiling. Use twisted pair or speaker cable for long runs (> 10 ft) back to the command station. Since the transmitter only draws 21 mA, the wire can be as small as 28 ga. Only one transmitter is needed for the entire layout. This device transmits low power radio frequencies on the Instrument-Scientific-Medical (ISM) band (also used by 900 MHz cordless phones) with a range of about 50 feet.
Out of stock