new layout

warning: this is not how to include the shop layout in a page, please read docs

Preview

Filtering by Clear filters
  • Works with compatible LocoNet Systems
  • Compact size for easy one-handed operation
  • Color 1.5” LCD Display Screen
  • Full numeric keys for easy locomotive selection
  • Fine speed control with encoder knob
  • Forward/Reverse toggle switch with braking
  • On/Off Switch, uses AA or BP600MH batteries
  • 2 or 4 Digit Locomotive decoder access, provide over
  • 9,000 loco addresses
  • 29 Functions
  • Digitrax Infrared operation with UR90/91/92
  • Duplex wireless with UR93/92
  • Duplex Scanner and Duplex settings editor
  • Over 2000 turnout decoder addresses
  • Locomotive Recall feature
  • Convenient Throttle Option Setup
  • Detachable LocoNet cable and Lanyard
  • Replaces the UT4
$136.00
UR93 Features:
  • Digitrax Duplex Radio Transceiver on LocoNet wire infrastructure (no IR support).
  • More than double the radio range of UR92 Duplex units.
  • Improved multi-path performance for cluttered layouts.
  • Plug and Play setup, PS14 Universal power supply included.
  • Compatible to be mixed with UR92 LocoNet Duplex Radio systems, for added coverage and improved reception.
  • Status LEDS.
  • Supports combinations of DT602D/DE and DT500D, DT402D and UT4D Duplex Radio throttles.
  • UR93E available for countries that require EN-300-328 Wireless conformity.
$98.95
  • Works with compatible LocoNet Systems
  • Compact size for easy one-handed operation
  • Color 1.5” LCD Display Screen
  • Full numeric keys for easy locomotive selection
  • Fine speed control with encoder knob
  • Forward/Reverse toggle switch with braking
  • On/Off Switch, uses AA or BP600MH batteries
  • 2 or 4 Digit Locomotive decoder access, provide over
  • 9,000 loco addresses
  • 29 Functions
  • Digitrax Infrared operation with UR90/91/92
  • Over 2000 turnout decoder addresses
  • Locomotive Recall feature
  • Convenient Throttle Option Setup
  • Detachable LocoNet cable and Lanyard
  • Replaces the UT4
$84.00
Evolution Express Set Includes:
  • DCS210+ Command Station/Booster With Intelligent AutoReverse
  • DT602 Super LocoNet Throttle
  • UP5 Universal Panel
  • PS615 Power Supply
  • Evolution Express Manual
The DT602 Advanced Super Throttle & DCS210+ Advanced Command Station Offers
  • Works with compatible LocoNet systems
  • Color 2.4” LCD Display Screen
  • Advanced menu system and displays
  • Built-in scrolling help and prompting
  • Soft ON/OFF switch, with zero OFF power-drain
  • Advanced display Power Saving for longer wireless battery operation
  • No more 9V batteries to remove! Throttles are now powered in wireless modes by 3 AA cells!
  • Can use recharged AA batteries
  • Available in standard tethered or Radio Duplex
  • Duplex Scan for available Networks and radio signal strength. Run without cords!
  • All throttles come with a LocoNet cord that can be unplugged, and is replaceable
  • Dual throttle controls let you control two locos simultaneously
  • Run locomotives with “encoder click” knobs for both speed and direction control
  • Full numeric keypad makes loco selection simple
  • Control light and sound effects functions with the press of a button
  • Control 29 functions (F0-F28).
  • Function active/inactive indicators
  • Convenient step-by-step throttle option set up
  • Supports simplified decoder programming
  • Simplified 2 or 4 digit addressing setup
  • Over 9,000 locomotive decoder addresses
  • Supports turnout and stationary decoder control
  • Over 2000 turnout decoder addresses
  • Fast clock display
  • Recall feature
  • Advanced Route editor
  • USB Interface
Big System Capacity for Big Layouts
  • Run up to 100 addresses at the same time on your system.
  • Run up to 100 throttles at the same time on your system.
Over 9000 Locomotive Addresses
  • Address 00 for operation of one loco or MU consist without decoders
  • Two Digit Addressing is easy to use. (Address 01-127)
  • Four Digit Addressing lets you use the road number of your engines as their addresses. (Address 0128-9000+)
5 or 8 Amps of Power to Run More Trains
  • Selectable Scale Voltage for Safe Operation in ALL Scales
  • Customizable Voltage Settings
  • 5 amps of power with included PS615 power supply
  • 8 amps with PS2012E power supply (sold separately)
Function Control
  • Control 29 functions (F0-F28).
  • Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
  • Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder capabilities).
Two DCC Outputs are Better than One!
  • Use one output for programming decoders while the other runs the layout. No need to shut down the layout to program decoders!
  • Use one output for a braking section while the other runs the layout.
Decoder Programming
  • Built in read/write programmer lets you program and read back CV values.
  • Supports Paged programming (Digitrax preferred method). Also supports direct, register and ops mode programming
Consisting
  • Supports Universal consisting (Digitrax preferred method). Allows ALL locos to be consisted prototypically, even analog locos.
  • Advanced consisting and Basic consisting, too!
  • Nested consisting where consists can be consisted together.
Stationary Decoders, Turnout Control & Turnout Position Reporting
  • Access to stationary decoder control for turnouts and other devices.
  • DT602 reports turnout position based on last command sent.
  • Control 2000+ stationary decoder addresses.
Routes
  • Turnout List/Route capability to simplify complex yard operations.
  • EZ routes button for simplified Command Station route programming
Customizable System Options
  • Turn audible warnings on or off.
  • Set up purging options.
  • Multi-format command station mode.
  • Loco Reset button for easy system purging
UP5 Universal Panel
  •  Makes LocoNet hook up simple!
  • 2 LocoNet jacks for hooking up your LocoNet network.
  • 3 throttle jacks for hooking up throttles and other non-RailSync devices.
Expandability
  • Evolution is just the beginning for large, complex layouts that emphasize prototypical operations.
  • With LocoNet you can add more boosters, throttles, power management, detection, transponding, signaling and much more.
  • DCS210+ comes with 3 LocoNet ports for easy expandability and a USB interface!
Other Advanced Features
  • IPL updatable firmware for continued product improvements
  • Device Query and Device Statistics to help with troubleshooting
  • Input Mode to help set up detection on your layout
  • Uses Expanded slots
$344.95
Coupler Trip Pin Pliers For HOn3, HO, S, On3 & O Scale Couplers. Adjust trip pin to the correct height by gently squeezing with these specially designed pliers. The pliers have jaw surfaces that are curved and smooth. Adjusting the height of your Coupler Trip Pins is easier because the pliers surfaces conform to the bend of the trip pins and prevent them from kinking when bending or straightening.
$11.99
#508 HO Scale AHM Rivarossi 4 wheel Coupler Conversion Bolsters 1pr. Kit Passenger cars can be equipped with truck mounted couplers using the correct conversion bolster attachment. Truck mounted couplers permit closer coupling on radii down to 18" without causing binding for most passenger cars. Non-Magnetic trucks should be used with Kadee® Magne-Matic® Couplers. Wheels should be changed on AHM and Athearn trucks. Use Kadee® #521 or #522 non-magnetic wheels. Each kit contains a pair of Draft Gear Boxes, one pair of NO.5®Couplers, #634 Centering Springs, screws, special bolsters and instructions.
$3.99



How to install

You can now add layouts you create in the Shop Admin into any post or page. To make it simple a Shortcode Generator is included. You can access it via this button.

The first button is the shortcode genreator launcher and the second one ( the one with a plus ) ads a single audio player to the page from the media gallery.