Furniture listing
Preview
- Decoder Selector: Tells you which board format and part number you need for specific models.
- Sound Samples: Hear our sounds in action!
- Choosing the Right Sound System: If you are new to SoundTraxx, model railroading, or are unfamiliar with our products.
- Sound Selection References: There are several for each decoder and they can be found below or in the Manuals section of our website.
- Up to 12 Prime Movers in each sound profile
- Up to 12 Bells
- 40+ Airhorns
- Additional couplers, cab chatter, and more!
Max. Motor Stall Current: | 2A |
Max. Function Current: | 100mA (each output) |
Function Outputs: | 8 |
Audio Amplifier: | 2 Watt, 8-Ohm Load |
DCC Track Voltage: | 7V – 22V |
Sound Channels: | 16 |
- Decoder Selector: Tells you which board format and part number you need for specific models.
- Sound Samples: Hear our sounds in action!
- Choosing the Right Sound System: If you are new to SoundTraxx, model railroading, or are unfamiliar with our products.
- Sound Selection References: There are several for each decoder and they can be found below or in the Manuals section of our website.
- Up to 12 Prime Movers in each sound profile
- Up to 12 Bells
- 40+ Airhorns
- Additional couplers, cab chatter, and more!
Max. Motor Stall Current: | 2A |
Max. Function Current: | 100mA (each output) |
Function Outputs: | 8 |
Audio Amplifier: | 2 Watt, 8-Ohm Load |
DCC Track Voltage: | 7V – 22V |
Sound Channels: | 16 |
- Decoder Selector: Tells you which board format and part number you need for specific models.
- Sound Samples: Hear our sounds in action!
- Choosing the Right Sound System: If you are new to SoundTraxx, model railroading, or are unfamiliar with our products.
- Sound Selection References: There are several for each decoder and they can be found below or in the Manuals section of our website.
- Up to 12 Prime Movers in each sound profile
- Up to 12 Bells
- 40+ Airhorns
- Additional couplers, cab chatter, and more!
Max. Motor Stall Current: | 2A |
Max. Function Current: | 100mA (each output) |
Function Outputs: | 8 |
Audio Amplifier: | 2 Watt, 8-Ohm Load |
DCC Track Voltage: | 7V – 22V |
Sound Channels: | 16 |
- Input interconnect board for DS74.
- Provides plug and play connectivity for DS74 inputs.
- Supplied with ribbon cable to plug into DS74 10 pin Input header.
- Allows plug-in of up to 4 DSXCP1 fascia controls.
- Direct ribbon cable plug-in header to BD4N detectors.
- 8 pin screw terminal plug for optional wire access to 8 input lines.
- Fascia mount Switch control device.
- Wire to DS74 input cable, or use DSXC4 for plug and play.
- Two color leds display current Switch state.
- Supplied with 3 wire control cable.
The small size of this board makes it ideal for both N and small HO models that come equipped with a NEXT18 socket. Installations can’t get any easier. Simply plug this decoder in and enjoy all of the Tsunami2 features you know and love!
Get an easy upgrade for your Bachmann Sound Value diesel models with the TSU-BH1. This decoder offers 8-function outputs and is available in 3 sound profiles EMD, GE, and ALCO. This decoder is designed to replace the factory board in the following Bachmann Sound Value Models: FA-2, FB-2, S-4, E7-A, SD70ACe, ES44AC, GP30, GP38-2, GP40, GP7, and SD40-2.
Get an easy upgrade for your Bachmann Sound Value diesel models with the TSU-BH1. This decoder offers 8-function outputs and is available in 3 sound profiles EMD, GE, and ALCO. This decoder is designed to replace the factory board in the following Bachmann Sound Value Models: FA-2, FB-2, S-4, E7-A, SD70ACe, ES44AC, GP30, GP38-2, GP40, GP7, and SD40-2.
This is an easy decoder upgrade for your Bachmann HO Sound Value steam models. The TSU-BH2 offers 8-function outputs and an easy install. Just replace the Sound Value decoder and enjoy all of the Tsunami2 features you love! This decoder is designed to replace the factory board in the following HO Bachmann Sound Value Steam Models: 2-6-0, 2-8-0, 4-6-2, 4-8-4 Class J, GS4 and more.
- DCS210+ Command Station/Booster With Intelligent AutoReverse
- DT602 Super LocoNet Throttle
- UP5 Universal Panel
- PS615 Power Supply
- Evolution Express Manual
- Works with compatible LocoNet systems
- Color 2.4” LCD Display Screen
- Advanced menu system and displays
- Built-in scrolling help and prompting
- Soft ON/OFF switch, with zero OFF power-drain
- Advanced display Power Saving for longer wireless battery operation
- No more 9V batteries to remove! Throttles are now powered in wireless modes by 3 AA cells!
- Can use recharged AA batteries
- Available in standard tethered or Radio Duplex
- Duplex Scan for available Networks and radio signal strength. Run without cords!
- All throttles come with a LocoNet cord that can be unplugged, and is replaceable
- Dual throttle controls let you control two locos simultaneously
- Run locomotives with “encoder click” knobs for both speed and direction control
- Full numeric keypad makes loco selection simple
- Control light and sound effects functions with the press of a button
- Control 29 functions (F0-F28).
- Function active/inactive indicators
- Convenient step-by-step throttle option set up
- Supports simplified decoder programming
- Simplified 2 or 4 digit addressing setup
- Over 9,000 locomotive decoder addresses
- Supports turnout and stationary decoder control
- Over 2000 turnout decoder addresses
- Fast clock display
- Recall feature
- Advanced Route editor
- USB Interface
- Run up to 100 addresses at the same time on your system.
- Run up to 100 throttles at the same time on your system.
- Address 00 for operation of one loco or MU consist without decoders
- Two Digit Addressing is easy to use. (Address 01-127)
- Four Digit Addressing lets you use the road number of your engines as their addresses. (Address 0128-9000+)
- Selectable Scale Voltage for Safe Operation in ALL Scales
- Customizable Voltage Settings
- 5 amps of power with included PS615 power supply
- 8 amps with PS2012E power supply (sold separately)
- Control 29 functions (F0-F28).
- Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
- Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder capabilities).
- Use one output for programming decoders while the other runs the layout. No need to shut down the layout to program decoders!
- Use one output for a braking section while the other runs the layout.
- Built in read/write programmer lets you program and read back CV values.
- Supports Paged programming (Digitrax preferred method). Also supports direct, register and ops mode programming
- Supports Universal consisting (Digitrax preferred method). Allows ALL locos to be consisted prototypically, even analog locos.
- Advanced consisting and Basic consisting, too!
- Nested consisting where consists can be consisted together.
- Access to stationary decoder control for turnouts and other devices.
- DT602 reports turnout position based on last command sent.
- Control 2000+ stationary decoder addresses.
- Turnout List/Route capability to simplify complex yard operations.
- EZ routes button for simplified Command Station route programming
- Turn audible warnings on or off.
- Set up purging options.
- Multi-format command station mode.
- Loco Reset button for easy system purging
- Makes LocoNet hook up simple!
- 2 LocoNet jacks for hooking up your LocoNet network.
- 3 throttle jacks for hooking up throttles and other non-RailSync devices.
- Evolution is just the beginning for large, complex layouts that emphasize prototypical operations.
- With LocoNet you can add more boosters, throttles, power management, detection, transponding, signaling and much more.
- DCS210+ comes with 3 LocoNet ports for easy expandability and a USB interface!
- IPL updatable firmware for continued product improvements
- Device Query and Device Statistics to help with troubleshooting
- Input Mode to help set up detection on your layout
- Uses Expanded slots
How to install
You can now add layouts you create in the Shop Admin into any post or page. To make it simple a Shortcode Generator is included. You can access it via this button.
The first button is the shortcode genreator launcher and the second one ( the one with a plus ) ads a single audio player to the page from the media gallery.