Furniture listing
Preview
The LokPilot 5 Fx DCC is a function decoder without motor output and is therefore perfect for installation in control cars or function models. As the "twin brother" of the LokPilot 5 Fx, it shares its characteristics and also the basic characteristics of all other LokPilot 5 decoders, but is a pure DCC decoder.
The LokPilot 5 Fx DCC is supplied in three variants: In addition to the "classic" version with 8-pole NEM 652 wiring harness, a variant for the 21MTC interface and with PluX22 interface is also available.
Modes
The LokPilot 5 Fx DCC is a "pure-bred" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders register fully automatically at a suitable digital center.
It masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.
The LokPilot 5 Fx DCC decoder detects the Märklin® brake distances as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake blocks or with equal voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An automatic ABC pen train allows automatic commuting between two stations. Although this de-coder does not have an engine output, this is also important for a function decoder in order to be able to synchronize control cars and motor cars.
The LokPilot 5 Fx DCC decoder can be used on analog DC webs.
The decoder switches "on-the-fly" fully automatically between operating modes. Most of the time, nothing needs to be adjusted.
Functions
The LokPilot 5 Fx DCC has been equipped with an astonishing number of function outputs. Depending on the cutting position design, each LokPilot 5 Fx DCC decoder offers at least 10 reinforced function outputs with 250mA output current each. For the versions with PluX22 or 21MTC interface, 4 outputs are added for controlling servos or logic level outputs. All important light radios are available. The brightness of each output can be set separately.
Interaction
The LokPilot 5 Fx DCC is designed for interaction with the LokSound 5 and the LokPilot 5 decoders: for example, it is possible to equip the locomotive of a multiple unit with a LokSound 5 decoder and the control car with a LokPilot 5 Fx DCC. Provided the same address, both behave absolutely identically. The identical arrangement of the CVs facilitates the tuning of the two decoders.
SKU: 59220The LokPilot 5 Nano DCC is the “twin” of the LokSound 5 Nano DCC. At 19.6 mm x 8.5 mm and a thickness of only 3.2 mm, it is exactly the same size as the corresponding LokSound decoder, but does without the sound functions. The LokPilot 5 Nano DCC is equipped with the E24 interface, which will fit into many newly released N gauge locomotives.
Modes
The LokPilot 5 Nano DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders log on to a suitable DCC System fully automatically. It masters all DCC programming command stations. Auxiliary registers exist for DCC systems that can only program CVs from 1-255.
The LokPilot 5 Nano DCC decoder recognizes the Märklin® braking sections as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.
The LokPilot 5 Nano DCC decoder can be used on analog DC trains. The maximum speed can be set separately. The decoder switches between the operating modes fully automatically "on-the-fly".
Functions
Despite its small size, the LokPilot 5 Nano DCC has 8 powered function outputs as well as a 5 logic level outputs provided at the E24 interface. All important lighting functions are available. The brightness of each output can be set separately. The decoder controls the automatic start-up and disconnection when uncoupling for ROCO®, Krois® and Märklin telex ® couplings.
Motor
The motor control of the LokPilot 5 Nano DCC has a variable PWM clock frequency from 10kHz to 50kHz, which ensures super-quiet operation, especially for bell anchor motors – the typical "hum" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function allows the decoder to be automatically measured against the motor. The LokPilot 5 Nano DCC decoder delivers up to 0.75A motor power.
SKU: 59925- 10 Exhaust Chuffs
- Up to 12 Prime Movers in each sound profile
- Up to 12 Bells
- 90 Whistles
- 40+ Airhorns
- Additional couplers, dynamos, cab chatter and more!
Dimensions: | 69 x 30.5 x 14mm |
Max. Motor Stall Current: | 4A |
Max. Function Current: | 400mA (each output) |
Function Outputs: | 8 |
Audio Amplifier: | 3 Watt, 8-Ohm Load |
DCC Track Voltage: | 7V – 27V |
Sound Channels: | 16 |
- 8 CV-Selectable Steam & Diesel Sound Schemes Included
- Mobile Decoder with SoundFX v3
- For Kato N P42 and similar
- 1.0 Amp/2 Amps Peak
- 6 FX3 Functions, 200ma Output
- 8 Ohm 13mm round Speaker
- 100uF Capacitor
- 8 CV-Selectable Steam & Diesel Sound Schemes Included
- Mobile Decoder with SoundFX v3
- For for Kato 4-8-4 FEF-3 and similar
- Drop-in light board replacement
- 1.0 Amp/2 Amps Peak
- 4 FX3 Functions, 200ma Output
- 8 Ohm 9x18x4 mm oval speaker
- 100uF Capacitor
- 8 CV-Selectable Steam & Diesel Sound Schemes Included
- Mobile Decoder with SoundFX v3
- For Kato SD80 MAC and similar
- 1.0 Amp/2 Amps Peak
- 4 FX3 Functions, 200ma Output
- 8 Ohm 9x18x4 mm oval speaker
- 100uF Capacitor
- 2 CV-Selectable Steam & Diesel Sound Schemes Included
- Mobile Decoder with SoundFX v3
- Fits many HO locomotives
- 21MTC interface
- Motor 1.0 Amp/2 Amps Peak
- 8 FX3 Functions, 200ma Output
- New sound .spjs loadable with Digitrax USB programmer
- 2 CV-Selectable Steam & Diesel Sound Schemes Included
- Mobile Decoder with SoundFX v3
- Fits many HO locomotives
- Digitrax Easy Connect 8 Pin Harness
- Motor 1.0 Amp/2 Amps Peak
- 4 FX3 Functions, 200ma Output
- New sound .spjs loadable with Digitrax USB programmer
- 8 Ohm 10 mm x 18 mm Oval Speaker
- 100uF Capacitor
- Decoder Selector: Tells you which board format and part number you need for specific models.
- Sound Samples: Hear our sounds in action!
- Choosing the Right Sound System: If you are new to SoundTraxx, model railroading, or are unfamiliar with our products.
- Sound Selection References: There are several for each decoder and they can be found below or in the Manuals section of our website.
- Up to 12 Prime Movers in each sound profile
- Up to 12 Bells
- 40+ Airhorns
- Additional couplers, cab chatter, and more!
Max. Motor Stall Current: | 2A |
Max. Function Current: | 100mA (each output) |
Function Outputs: | 8 |
Audio Amplifier: | 2 Watt, 8-Ohm Load |
DCC Track Voltage: | 7V – 22V |
Sound Channels: | 16 |
- Decoder Selector: Tells you which board format and part number you need for specific models.
- Sound Samples: Hear our sounds in action!
- Choosing the Right Sound System: If you are new to SoundTraxx, model railroading, or are unfamiliar with our products.
- Sound Selection References: There are several for each decoder and they can be found below or in the Manuals section of our website.
- Up to 12 Prime Movers in each sound profile
- Up to 12 Bells
- 40+ Airhorns
- Additional couplers, cab chatter, and more!
Max. Motor Stall Current: | 2A |
Max. Function Current: | 100mA (each output) |
Function Outputs: | 8 |
Audio Amplifier: | 2 Watt, 8-Ohm Load |
DCC Track Voltage: | 7V – 22V |
Sound Channels: | 16 |
- Decoder Selector: Tells you which board format and part number you need for specific models.
- Sound Samples: Hear our sounds in action!
- Choosing the Right Sound System: If you are new to SoundTraxx, model railroading, or are unfamiliar with our products.
- Sound Selection References: There are several for each decoder and they can be found below or in the Manuals section of our website.
- Up to 12 Prime Movers in each sound profile
- Up to 12 Bells
- 40+ Airhorns
- Additional couplers, cab chatter, and more!
Max. Motor Stall Current: | 2A |
Max. Function Current: | 100mA (each output) |
Function Outputs: | 8 |
Audio Amplifier: | 2 Watt, 8-Ohm Load |
DCC Track Voltage: | 7V – 22V |
Sound Channels: | 16 |
- Decoder Selector: Tells you which board format and part number you need for specific models.
- Sound Samples: Hear our sounds in action!
- Choosing the Right Sound System: If you are new to SoundTraxx, model railroading, or are unfamiliar with our products.
- Sound Selection References: There are several for each decoder and they can be found below or in the Manuals section of our website.
- Up to 12 Prime Movers in each sound profile
- Up to 12 Bells
- 40+ Airhorns
- Additional couplers, cab chatter, and more!
Max. Motor Stall Current: | 2A |
Max. Function Current: | 100mA (each output) |
Function Outputs: | 8 |
Audio Amplifier: | 2 Watt, 8-Ohm Load |
DCC Track Voltage: | 7V – 22V |
Sound Channels: | 16 |
How to install
You can now add layouts you create in the Shop Admin into any post or page. To make it simple a Shortcode Generator is included. You can access it via this button.
The first button is the shortcode genreator launcher and the second one ( the one with a plus ) ads a single audio player to the page from the media gallery.