Furniture listing

G Scale shims

Package Includes:

• (25) Pair #148 Whisker® Metal Couplers - Medium Centerset Shank
• (10) Spare #622 Knuckle Springs
• **Gearboxes not included**

Material	-   Metal Knuckle, Plastic Coupler Swallow-tail Shank
Length	-   Extra Long (11.68mm , .460 inch , 29/64") (pulling face to the dovetail sholder)
Coupler Offset	-   Underset
Knuckle Spring	-   #622
Centering System	-   NEM European Style Coupler
Head	-   Standard Head

Material	-   Metal Knuckle, Plastic Coupler Swallow-tail Shank
Length	-   Long (10.67mm , .420 inch , 27/64") (pulling face to the dovetail sholder)
Coupler Offset	-   Underset
Knuckle Spring	-   #622
Centering System	-   NEM European Style Coupler
Head	-   Standard Head

Material	-   Metal Knuckle, Plastic Coupler Swallow-tail Shank
Length	-   Medium (8.63mm , .340 inch , 11/32") (pulling face to the dovetail sholder)
Coupler Offset	-   Underset
Knuckle Spring	-   #622
Centering System	-   NEM European Style Coupler
Head	-   Standard Head

Material	-   Metal Knuckle, Plastic Coupler Swallow-tail Shank
Length	-   Short (7.11mm , .280 inch , 9/32") (pulling face to the dovetail sholder)
Coupler Offset	-   Underset
Knuckle Spring	-   #622
Centering System	-   NEM European Style Coupler
Head	-   Standard Head

Coupler Trip Pin Pliers For HOn3, HO, S, On3 & O Scale Couplers. Adjust trip pin to the correct height by gently squeezing with these specially designed pliers. The pliers have jaw surfaces that are curved and smooth. Adjusting the height of your Coupler Trip Pins is easier because the pliers surfaces conform to the bend of the trip pins and prevent them from kinking when bending or straightening.

#508 HO Scale AHM Rivarossi 4 wheel Coupler Conversion Bolsters 1pr. Kit Passenger cars can be equipped with truck mounted couplers using the correct conversion bolster attachment. Truck mounted couplers permit closer coupling on radii down to 18" without causing binding for most passenger cars. Non-Magnetic trucks should be used with Kadee® Magne-Matic® Couplers. Wheels should be changed on AHM and Athearn trucks. Use Kadee® #521 or #522 non-magnetic wheels. Each kit contains a pair of Draft Gear Boxes, one pair of NO.5®Couplers, #634 Centering Springs, screws, special bolsters and instructions.

#505 HO Scale AHM Rivarossi 6-wheel Coupler Conversion Bolsters 1pr. Kit Passenger cars can be equipped with truck mounted couplers using the correct conversion bolster attachment. Truck mounted couplers permit closer coupling on radii down to 18" without causing binding for most passenger cars. Non-Magnetic trucks should be used with Kadee® Magne-Matic® Couplers. Wheels should be changed on AHM and Athearn trucks. Use Kadee® #521 or #522 non-magnetic wheels. Each kit contains a pair of Draft Gear Boxes, one pair of NO.5® Couplers, #634 Centering Springs, screws, special bolsters and instructions.

Whisker Coupler Instructions Two pair per package HO-Scale UPC: 765484001430   Made in the U.S.A. Package Includes:

• (2) Pair #143 Whisker® Metal Couplers - Short Centerset Shank
• (2) Pair #242 Snap-Together Gearboxes
• (2) #622 Knuckle Springs

 

Material	-   Metal
Shank Length	-   Short (1/4") (center hole to back of coupler head)
Coupler Offset	-   Centerset
Knuckle Spring	-   #622
Centering System	-   Whisker®
Head	-   Standard Head
Works In Place of	-   #23, #33 (#143 in a #252 box), Short Centerset "clone" couplers
Works With	-   #213, #232, #234, #242, #252, #262, manufacturer cast-on draft gearboxes #242 Snap-Together Gearbox Features: Material  -   Insulated Plastic Lid Type  -   Snap-Together Dimensions  -   7/16"L x 5/16"W x 1/8"H Works With  -   NO.5®, #58, 20-Series and 40-Series, All Whisker® Couplers Mounting Specifications: Mounting Height  -   29/64" Centerline  -   25/64" Trip Pin Height  -   1/32" Center Hole  -   2-56 Insulated Screws are the most commonly used. (Screw length will vary)

5 Prong Jaw Excellent for handling small parts. Grab, lift, pull, pick and place small, difficult-to-grasp items.