Furniture listing
warning: this is not how to include the shop layout in a page, please read docs
Preview
Filtering byLights & LEDs
Image
name
description
category
price
Two LEDs flash in unison when a 9 volt battery is attached. This kit includes a PC board, all the parts and instructions to make a simple flasher circuit.
$3.39
Current limiting resistor NOT needed when used with 12 volt source.
The Warm White gives nice yellowish color between the Sunny White and the Golden White
3mm 12 Volt Warm White LED With Water Clear Lens - 10 Pack
$4.49
These are the smallest light source we offer and are just like the head of a pencil... they are that small! If you think soldering normal size SMDs are difficult soldering these is just about impossible without specialized equipment. Our pre soldered units take all the work out of it! 0402 SMD units are very small and difficult to solder! Each unit comes with a soldered on resistor for 12v operation and pre-
- Size: 0402 SMD LED (about 1.0 x 0.5mm)
- Wire leads are about 6-7 inches in length
- Forwarding Voltage Resistored (included): 12v
- Forward Voltage non resistored: 3.4v max
- Forwarding Current (typ/max): 20mA
- DC Operation
- Light Color: WHITE
$2.99
These are the smallest light source we offer and are just like the head of a pencil... they are that small! If you think soldering normal size SMDs are difficult soldering these is just about impossible without specialized equipment. Our pre soldered units take all the work out of it! 0402 SMD units are very small and difficult to solder! Each unit comes with a soldered on resistor for 12v operation and pre-
- Size: 0402 SMD LED (about 1.0 x 0.5mm)
- Wire leads are about 6-7 inches in length
- Resistor for 12v operation (works at 9v too)
- Forwarding Voltage Resistored (included): 12v
- Forward Voltage non resistored: 2.2v max
- Forwarding Current (typ/max): 20mA
- DC Operation
- Light Color: RED
$2.99
These are the smallest light source we offer and are just like the head of a pencil... they are that small! If you think soldering normal size SMDs are difficult soldering these is just about impossible without specialized equipment. Our pre soldered units take all the work out of it! 0402 SMD units are very small and difficult to solder! Each unit comes with pre-
- Size: 0402 SMD LED (about 1.0 x 0.5mm)
- Wire leads are about 6-7 inches in length
- Forwarding Voltage Resistored (included): 12v
- Forward Voltage non resistored: 3.4v max
- Forwarding Current (typ/max): 20mA
- DC Operation
- Light Color: GREEN
$2.99
These are the smallest light source we offer and are just like the head of a pencil... they are that small! If you think soldering normal size SMDs are difficult soldering these is just about impossible without specialized equipment. Our pre soldered units take all the work out of it! 0402 SMD units are very small and difficult to solder! Each unit comes with pre-
- Size: 0402 SMD LED (about 1.0 x 0.5mm)
- Wire leads are about 6-7 inches in length
- Wire color: Black
- Forwarding Voltage Resistored (included): 12v
- Forward Voltage non resistored: 3.4v max
- Forwarding Current (typ/max): 20mA
- DC Operation
- Light Color: WARM WHITE
$2.99
You receive quality and predictability from all our incandescent lamps. To maximize the life of your lamp, we suggest you do not exceed the rated current. If you are using a voltage higher than the lamp's rating, you need to add the proper value resistor, to limit the current flow to the bulb. Using a lower rated current can extend the life of a lamp.
$15.00
The 255mm long, 9mm slim LED lighting strips with 11 LEDs are designed for N, TT and H0 gauge cars that are going to be operated on digital model railroads. We are offering two versions: The version with Part number 50708 is equipped with warmwhite LEDs, while on part number 50709 we installed yellow LEDs. This will give you the choice to match the lighting strips with your existing cars. As usual for all ESU lighting strips, you can adjust the brightness according to your wishes with the help of a small variable resistor (potentiometer). Thanks to built-in voltage control the brightness remains almost constant even when conventional driving. To bridge prolonged power interruptions, you may add a PowerPack. Of course, the lighting strips can be arbitrarily cut to fit the cars of all manufacturers and comes with a red taillight.
The integral ESU decoder supports, of course, both Motorola® and DCC and also works on DC analogue layouts. The operating mode is detected automatically. In addition to the basic maximum brightness adjusted with the control knob on the lighting strip, brightness may be further adjusted by means of the software. Various prototypical lighting effects such as soft dimming, fluorescent lamp effect, faulty fluorescent lamp, battery powered lighting and many others provide realistic results. The 11 LEDs are wired in several groups, which can be switched separately. Function mapping allows to assign the LEDs to the function button of your choice. Two additional outputs may be used for the red end-of-train lights or for directional lighting in a cab control car.
Of course, all effects can also be programmed once the lighting strip has been installed. Alternatively you may read out the values of your digital interior lights on the programming track.
$22.39
How to install
You can now add layouts you create in the Shop Admin into any post or page. To make it simple a Shortcode Generator is included. You can access it via this button.
The first button is the shortcode genreator launcher and the second one ( the one with a plus ) ads a single audio player to the page from the media gallery.
