Furniture listing

warning: this is not how to include the shop layout in a page, please read docs

Preview

Filtering byLights & LEDs Clear filters
Image
name
description
category
price
The 255mm long, 9mm slim LED lighting strips with 11 LEDs are designed for N, TT and H0 gauge cars that are going to be operated on digital model railroads. We are offering two versions: The version with Part number 50708 is equipped with warmwhite LEDs, while on part number 50709 we installed yellow LEDs. This will give you the choice to match the lighting strips with your existing cars. As usual for all ESU lighting strips, you can adjust the brightness according to your wishes with the help of a small variable resistor (potentiometer). Thanks to built-in voltage control the brightness remains almost constant even when conventional driving. To bridge prolonged power interruptions, you may add a PowerPack. Of course, the lighting strips can be arbitrarily cut to fit the cars of all manufacturers and comes with a red taillight. The integral ESU decoder supports, of course, both Motorola® and DCC and also works on DC analogue layouts. The operating mode is detected automatically.  In addition to the basic maximum brightness adjusted with the control knob on the lighting strip, brightness may be further adjusted by means of the software. Various prototypical lighting effects such as soft dimming, fluorescent lamp effect, faulty fluorescent lamp, battery powered lighting and many others provide realistic results. The 11 LEDs are wired in several groups, which can be switched separately. Function mapping allows to assign the LEDs to the function button of your choice. Two additional outputs may be used for the red end-of-train lights or for directional lighting in a cab control car. Of course, all effects can also be programmed once the lighting strip has been installed. Alternatively you may read out the values of your digital interior lights on the programming track.
$23.99
Our current pick-ups (50707) provide optimal electrical contact in all commercially available coaches and are easy to install: simply glue them to the underside of the bogie so that the pre-tensioned contact strips touch the inside of the wheels (wheel flange). Since each set consists of two sprung contact strips one set per axle is enough. Suitable for any axle spacing. Suitable for H0 DC and AC . Set with 8 current pick-up contacts sufficient for 8 axles.
$9.59
Brighten the end of your train by adding these markers to your observation car or caboose! Kit includes two brass marker lights with lens and 3V LEDs installed, bridge rectifier and dropping resistors. Markers can be track or battery powered.
$25.00

Quick Details

  • Type: SMD LED
  • Model Number: GS-06WW41608CH
  • Chip Material: AlGaInP
  • Emitting Color: Warm White
  • Luminous Intensity: b:130 r:120 g:500mcd
  • Luminous Flux(lm): 0.3
  • Optical Attenuation(%): 3
  • Power: 90mv
  • Power Dissipation: 0.09
  • Viewing Angle(°): 120
  • Color Rendering Index(Ra): 80
  • Color Temperature: 3000-7500k
  • Operating Temperature(℃): -30 - 85
  • Storage Temperature(℃): -40 - 90
  • Place of Origin: Guangdong, China (Mainland)
  • Brand Name: sunrate
  • Certification: CE, RoHS
  • product name: 0603 smd led
  • size(L*W*H): 1.6*1.5*0.55 mm
  • color range: RGB
  • lens type: water clear flat mold
  • reverse voltage: 5 v
  • water clear flat mold: blue:470nm red:630nm green:530nm
  • spectral line half-width: blue:30nm red:18nm green:35nm
  • Forward Voltage: blue:2.8-3.6 red:1.8-2.6 green:2.8-3.6v
  • REVERSE CURRENT: 5 ua
  • other certifications: ETL, FCC, GS,, REACH, SAA, UL
$0.49
Illumination Color: Green, Red
Wavelength/Color Temperature: 568 nm, 625 nm
Luminous Intensity: 5 mcd
Viewing Angle: 60 deg
Lens Color/Style: Diffused
If - Forward Current: 20 mA
Maximum Operating Temperature: + 85 C
Minimum Operating Temperature: - 40 C
Packaging: Bulk
Brand: Kingbright
LED Size: T-1 3/4 (5 mm)
Lens Dimensions: 5 mm
Lens Shape: Round
Mounting Style: Through Hole
Operating Supply Voltage: 2 V, 2.2 V
$0.49



How to install

You can now add layouts you create in the Shop Admin into any post or page. To make it simple a Shortcode Generator is included. You can access it via this button.

The first button is the shortcode genreator launcher and the second one ( the one with a plus ) ads a single audio player to the page from the media gallery.