Furniture listing
warning: this is not how to include the shop layout in a page, please read docs
Preview
Filtering byLights & LEDs
Image
name
description
category
price
Current limiting resistor needed in series with one lead. When connected directly to DCC voltage, Litchfield Station, LLC recommends a 750 to 1500 ohm resistor for white LEDs. The lower the resistor value, the brigher the light, but the shorter the life of the LED. With a 1000 ohm resistor, expect a life of about 5000 illuminated hours (over 6 months of 24 hours a day, everyday). Use 1.5K to 2K resistors for colored LEDs.
The longer lead is the anode and connects to the positive voltage (blue decoder wire).
$1.29
Current limiting resistor needed in series with one lead. When connected directly to DCC voltage, Litchfield Station, LLC recommends a 750 to 1500 ohm resistor for white LEDs. The lower the resistor value, the brigher the light, but the shorter the life of the LED. With a 1000 ohm resistor, expect a life of about 5000 illuminated hours (over 6 months of 24 hours a day, everyday). Use 1.5K to 2K resistors for colored LEDs.
The longer lead is the anode and connects to the positive voltage (blue decoder wire).
The Orange Led can possibly also be used for rotary beacon lights.
$0.49
Current limiting resistor needed in series with one lead. When connected directly to DCC voltage, Litchfield Station, LLC recommends a 750 to 1500 ohm resistor for white LEDs. The lower the resistor value, the brigher the light, but the shorter the life of the LED. With a 1000 ohm resistor, expect a life of about 5000 illuminated hours (over 6 months of 24 hours a day, everyday). Use 1.5K to 2K resistors for colored LEDs.
The longer lead is the anode and connects to the positive voltage (blue decoder wire).
$1.29
These kits include on-board voltage regulation and a SUPER CAP to ride over track power dropouts with a minimum of flickering! The LEDs mounted on the circuit board provide realistic lighting with a florescent color value. They are designed to be broken as needed for sizing into your project. If you are talented with a soldering iron, you can even join the snapped apart sections together for multi-level cars - just be sure to match polarity! For ease of installation, these kits include a set of Miniatronics' Phosphor Bronze Electrical Track Pick-ups. You won't need resistor wheel sets to trip your block detectors with these units in your caboose or passenger cars.
The smaller kit (100-CB-201)
is designed for HO cabooses, but finds itself ideally suited for many N-scale passenger cars! It has 4 LEDs equally spaced on its PC board. It draws a total of 37 mA (0.037 amps) from your track.
$25.80
Miniatronics Lamp 1.5V, 1.2mm, Red
$14.36
Miniatronics Lamp 1.5V, 1.2mm, Red
$1.87
Current limiting resistor NOT needed when used with 12 volt source.
The Warm White gives nice yellowish color between the Sunny White and the Golden White
5mm 12 Volt Warm White LED With Water Clear Lens
$0.49
Current limiting resistor NOT needed when used with 12 volt source.
The Warm White gives nice yellowish color between the Sunny White and the Golden White
3mm 12 Volt Warm White LED With Water Clear Lens
$0.49
Current limiting resistor NOT needed when used with 12 volt source.
3mm 12 Volt Red Diffused LED
$0.49
Current limiting resistor NOT needed when used with 12 volt source.
3mm 12 Volt Green Diffused LED
$0.49
How to install
You can now add layouts you create in the Shop Admin into any post or page. To make it simple a Shortcode Generator is included. You can access it via this button.
The first button is the shortcode genreator launcher and the second one ( the one with a plus ) ads a single audio player to the page from the media gallery.
