The AR10 is an automatic reverse loop controller for DCC layouts. In addition it functions as a circuit breaker for the reverse loop. Very simple connections: Two wires to the main line and two wires to the auto reverse loop. Recommended for DCC systems from 1 amp to 10 amps. Make sure you set the trip rating correctly to match your DCC systems current capacity.
SKU: 524o233
Use with any DCC system to prevent large voltage spikes.
Reduces or eliminates voltage spikes on long runs of DCC bus wire
Protects decoders from damaging inductive voltage spikes
Solve temporary loss of control or runaway problems
Preserves DCC waveform accuracy
SKU #5240305
The Small Sized NH will allow a typical HO locomotive to travel over a dirt clod that is 3 feet long if needs be and still operate the lights with NO FLICKER! Do not exceed DCC track voltage of 15v. 1.25" x .64" x .29" 32 x 16 x 7.5 mm
Eliminates or reduces the following due to dirty track or unwired switchfrogs
Dimensions: 2.14" x 0.640” x 0.400" (54 x 16 x 10 mm)
High power version for larger locomotives - Eliminates or reduces the following due to dirty track or unwired switch frogs
• Stalling
• Sound interruption
• Light flicker
SKU: 5240149
You can now add layouts you create in the Shop Admin into any post or page. To make it simple a Shortcode Generator is included. You can access it via this button.
The first button is the shortcode genreator launcher and the second one ( the one with a plus ) ads a single audio player to the page from the media gallery.
Please note: The companies we buy from are in the process of updating their prices for 2023. Prices on our website are subject to change at this time. Dismiss