Furniture listing

The ease of operation and attention to the human interface that you have come to expect from NCE systems with the power to run large pikes, including heavy-duty garden layouts, comes standard on these systems. They can have enough cabs on them to run the largest of layouts. UseRJ cablesto connect your fascia panels to the set. These sets use aCR2032 batteryto retain the data when the set is off. MR. DCC recommends annual replacement of the battery. See RELATED PRODUCTS, below. Power Pro If you are in the smaller scales (up through S or even smaller O scale), the 5 amp Power Pro system is just the ticket for your layout. The power transformer recommended for 115 volt mains is the P515 - see RELATED PRODUCTS, below. Powerhouse Pro The power hungry G scale operator will appreciate the robust 10 amp Powerhouse Pro system. All the features that make NCE so fun, with enough power to pull the grade! This is an exceptionally powerful system. Please do not use it on smaller scales, even with circuit breakers - severe damage can result! The power transformer recommended for 115 volt mains is the PS-1812-AC - see RELATED PRODUCTS, below. Most G scale power packs do NOT provide power clean enough to run this sophisticated piece of electronics. PH-10 NMRA Conformance Warrant #2005-011 Power Pro System Box If you already have a PowerCab and want to upgrade to the ultimate NCE set, select the SYSTEM BOX only. You will only spend a few dollars more than the 5 amp system, but you pick up the ability to use your PowerCab on the workbench, programming sound decoders and testing locomotive current. Radio Option You can go cordless with the radio option, either when you purchase the original set, or in the future. Radio only sold in the USA, Canada and Australia. Litchfield Station is authorized to upgrade your non-radio cabs to radio, too! Internal Battery Charger Option RC including NiMH batteries allows you to automatically charge your batteries when plugged into a live 524-Utp. Utps may also be powered by a PS112-1/8 and left on overnight to charge your cabs.

NCE DCC system command station (ND) 524-CS02..Recommended Power source from Booster, or stand alone use PS215

If you need more power than the Power Pro alone can supply, these boosters can help you out. They come in two sizes, aimed at different scales. If you are in S or smaller scales, the PB105, is right for you. It supplies an additional 5 Amps of continuous power on your track. Enough to handle very large lash-ups of locomotives and still have reserve capacity. Recommended power supply for 115 volt mains is the P515 Can purchase a PB105 but it will be special order please allow 2 weeks before delivery.     NCE model 524-045 PB5 Power Booster with 5-amp power supply for Power Pro DCC System. If you need more power than the Power Pro alone can supply, the PB5 supplies 5 Amps of continuous voltage to your track. Enough to handle very large lashups of locomotives and still have reserve capacity. Can be adapted to Digitrax, Lenz, CVP and other DCC systems  For indoor use only. Not compatible with NCE Power Cab DCC System. Attention international buyers: Includes new P514 5-amp power supply that will operate on 100-240vAC current, approved for US, Canada, EU, Australia and New Zealand (receptacle adapter required for higher voltage - not included) Features:

• 5-Amp Power Pro Power Booster with Status Light
• One 7 foot control 4-wire bus cable with RJ-11 modular telephone plugs (with four gold-plated contacts) on each end
• One track connector
• DC Power Supply with additional 25%, 30sec surge capability Input: 100-240vAC 50/60Hz Output options: 13.8v @ 5 Amps; 12v @ 5.83 Amps
• PB5 Product Manual
• NCE warranty

If you need more power than the Power Pro alone can supply, these boosters can help you out. They come in two sizes, aimed at different scales. If you are in S or smaller scales, the PB105, is right for you. It supplies an additional 5 Amps of continuous power on your track. Enough to handle very large lash-ups of locomotives and still have reserve capacity. Recommended power supply for 115 volt mains is the P515 Can purchase a PB105 but it will be special order please allow 2 weeks before delivery.     NCE model 524-045 PB5 Power Booster with 5-amp power supply for Power Pro DCC System. If you need more power than the Power Pro alone can supply, the PB5 supplies 5 Amps of continuous voltage to your track. Enough to handle very large lashups of locomotives and still have reserve capacity. Can be adapted to Digitrax, Lenz, CVP and other DCC systems  For indoor use only. Not compatible with NCE Power Cab DCC System. Attention international buyers: Includes new P514 5-amp power supply that will operate on 100-240vAC current, approved for US, Canada, EU, Australia and New Zealand (receptacle adapter required for higher voltage - not included) Features:

• 5-Amp Power Pro Power Booster with Status Light
• One 7 foot control 4-wire bus cable with RJ-11 modular telephone plugs (with four gold-plated contacts) on each end
• One track connector
• DC Power Supply with additional 25%, 30sec surge capability Input: 100-240vAC 50/60Hz Output options: 13.8v @ 5 Amps; 12v @ 5.83 Amps
• PB5 Product Manual
• NCE warranty