Furniture listing

A 6 foot four wire coiled cable for cabs. Has RJ12 connectors on both ends. SKU:  05240209

Thumbwheel-Encoder-assembly-for-Procab-&-Power-Cab-p40150656 SKU:  524-0506

SKU:  5240503

Are the buttons on your Power Cab or Pro Cab warn out and in need of retirement? We have replacements for your hand held.

The PowerCab is a

• DCC starter set - up to 2 amps
• DCC Cab to use on other NCE layouts
• Programming Station

As a DCC Starter set, PowerCab provides 1.7 amp nominal current with 2 amp maximum current to the rails and allows control of up to four trains, using one to three ProCabs or Engineer Cabs The PowerCab has virtually all of the features of the ProCab and can be used on any NCE layout, with the included coiled cord. On the workbench, the PowerCab allows you to monitor current draw by your locomotives and program any decoder now on the market without cumbersome and expensive programming track boosters! With the NCE USB interface, you can use your computer and DecoderPro to maintain your locomotive data files. When you are using the PowerCab on a small layout, Mr. DCC recommends the AutoSW auto-switch to isolate the programming track function from the layout, preventing accidental reprogramming of all the locos on the layout. He also recommends the throttle pocket shown in RELATED PRODUCTS below to hold it! The AutoSW also works with the Digitrax Zephyr. With an extra PCP and P114 or P214 you can easily move your PowerCab from the workbench to the layout, or between layouts. The PowerCabs do have the latest Version chip

You have the option of having your PowerCab come to you with the radio option already installed. Understand that this means that you can use your PowerCab as a radio throttle on another radio-equipped NCE system (including the SB5). Your "radio" PowerCab will NOT be a base station for its own system. To use radio with a PowerCab, it must remain plugged in, a RB02 must be added, and one to three radio Cabs may be used. The PowerCab is a

• DCC starter set - up to 2 amps
• DCC Cab to use on other NCE layouts
• Programming Station

As a DCC Starter set, PowerCab provides 1.7 amp nominal current with 2 amp maximum current to the rails and allows control of up to four trains, using one to three ProCabs or Engineer Cabs The PowerCab has virtually all of the features of the ProCab and can be used on any NCE layout, with the included coiled cord. On the workbench, the PowerCab allows you to monitor current draw by your locomotives and program any decoder now on the market without cumbersome and expensive programming track boosters! With the NCE USB interface, you can use your computer and DecoderPro to maintain your locomotive data files. When you are using the PowerCab on a small layout, Mr. DCC recommends the AutoSW auto-switch to isolate the programming track function from the layout, preventing accidental reprogramming of all the locos on the layout. He also recommends the throttle pocket shown in RELATED PRODUCTS below to hold it! The AutoSW also works with the Digitrax Zephyr. With an extra PCP and P114 or P214 you can easily move your PowerCab from the workbench to the layout, or between layouts.