Furniture listing

warning: this is not how to include the shop layout in a page, please read docs

Preview

Filtering bySwitches and Relays Clear filters
Image
name
description
category
price
Atlas Switch Machines are made to convert manual Code 100 Snap Switch turnouts to remote control. These solenoid turnout motors are available for several Atlas turnouts as well as under-table versions. Control Box 150-56 (sold separately) allows use of standard three-wire wiring, and other single-pole, double-throw momentary electrical switches may be used (not included). Switch Machines are part of the line of Atlas HO Scale Code 100 track.
$10.76
Atlas Switch Machines are made to convert manual Code 100 Snap Switch turnouts to remote control. These solenoid turnout motors are available for several Atlas turnouts as well as under-table versions. Control Box 150-56 (sold separately) allows use of standard three-wire wiring, and other single-pole, double-throw momentary electrical switches may be used (not included). Switch Machines are part of the line of Atlas HO Scale Code 100 track.
$12.20
RATED: 3 amp @ 120 Vac. Threaded bushing. Solder lug terminals. 0.43" long handle. SKU:  MS-12
$2.49
Normally open switch with 1/4" bushing and red plastic button. Ideal for most low current projects.
$1.29
Toggle Switch SPDT Surface Mount, Right Angle
$7.49
The CIRCUITRON ER-2 circuits consisting of a 2 amp relay, double pole double throw, and all the necessary driver circuitry to enable it to be directly connected to the output of any CIRCUITRON Detection Units. The relay contacts can be used to control AC or DC circuits and are ideal for use with CIRCUITRON Block Occupancy Detectors to provide automatic train control.  The ER-2 has 12 volt relays and requires a supply voltage of 11 to 14 volts DC. The ER-2 presents a negligible load on the Detection Unit to which it is connected as the control current is only around 2 milliamps.
$16.95
The CIRCUITRON ER-1 is a circuit consisting of a 2 amp relay, single pole double throw in the case of the ER-1, and all the necessary driver circuitry to enable them to be directly connected to the output of any CIRCUITRON Detection Units. The relay contacts can be used to control AC or DC circuits and are ideal for use with CIRCUITRON Block Occupancy Detectors to provide automatic train control. The ER-1 has 12 volt relays and require a supply voltage of 11 to 14 volts DC. The ER-1 presents a negligible load on the Detection Unit to which it is connected as the control current is only around 2 milliamps.
$13.95
Miniature toggle switches to control turnouts and provide control signals to stationary decoders. THESE SWITCHES ARE NOT ADEQUATE TO SWITCH DCC TRACK POWER, including programming tracks!
$2.39



How to install

You can now add layouts you create in the Shop Admin into any post or page. To make it simple a Shortcode Generator is included. You can access it via this button.

The first button is the shortcode genreator launcher and the second one ( the one with a plus ) ads a single audio player to the page from the media gallery.