Furniture listing
Preview
- ALCo PA
- Back EMF Load Compensation:
- Quiet Drive:
- DC Mode:
- RailCom®:
- Variable Momentum:
- LED Support:
- Function Remapping:
- Programmable Lighting Effects:
- Dimmable Brightness:
- Decoder Lock:
- User-Loadable Speed Tables:
- Size: .36” x .42” x .13” 9.05mm x 10.61mm x 2.67mm
- N Scale
- 1.0 Amp/1.5 Amps Peak
- 2 FX3 Functions, 0.5 Amp with 6 Pin NEM 651 type plug
- FX3 Function outputs for prototypical lighting effects and on/off control: Constant Brightness Lighting with directional or independent control. Optimized selectable LED or incandescent lamp operation Realistic Effects like Ditch lights, Mars lights, strobes, and many more Configurable Pulse Function available on all function outputs. FX3 & Standard Function Qualifiers operate functions based on direction, F0 on or off, direction and F0, and whether loco is moving. Function Mapping for custom function setup. Master Light Switch turns off all lights & functions with one keystroke. Advanced Consist Function Controls.
- Digitrax LocoMotion® System-Your locomotives look like the real thing. The Digitrax LocoMotion System makes them run like the real thing, too! Scaleable Speed Stabilization (Back EMF) with simple setup & 256 level resolution. Torque Compensation. 128 Speed Step operation (14 or 28 steps can also be used). Momentum with acceleration and deceleration. Normal Direction of Travel is user selectable. Switching Speed feature for easier and faster access to yard speeds. 3 Step Speed Tables set start, mid and max voltage for custom control. 28 Step Speed Tables with 256 level resolution for precise control.
- Program CVs using any Digitrax Compatible Control system without havingto buy any extra equipment.
- 2 Digit and 4 Digit Addressing.
- Basic, Advanced & UniVersal Consisting.
- SuperSonic motor drive for silent operation.
- Direct mode programming.
- Decoder Reset CV with or without speed table reset.
- Transponder Equipped ready for transponding on your Layout.
- Motor Isolation Protection helps prevent damage to your decoder.
- Automatic Analog Mode Conversion when running on DC layout.
- Decoder Lock for individual programming of multiple decoders in one loco.
- Motor Current
- 1.0 amp maximum
- 1.25 amp stall current rating
- Lighting functions
- Four outputs
- Special lighting effects
- LED lighting effects
- silent high frequency drive
- Size:
- 0.56 x 0.34 x 0.12 inches
- 14 x 8,5 x 3 mm
- Motor Current - 1 amp operating
- Lighting functions
- Two outputs
- Special lighting effects
- Back EMF or Dither Quiet Drive selectable by CV
- Size:
- 0.26 x 0.51x 0.11 inches
- 6,6 x 12,95 x 2,79 mm
- Motor Current - 1 amp operating
- Lighting functions
- Two outputs
- Special lighting effects
- Back EMF or Dither Quiet Drive selectable by CV
- Size:
- 0.26 x 0.51x 0.11 inches
- 6,6 x 12,95 x 2,79 mm
- Motor Current - 1 amp operating
- Lighting functions
- Two outputs
- Special lighting effects
- Back EMF or Dither Quiet Drive selectable by CV
- Size:
- 0.26 x 0.51x 0.11 inches
- 6,6 x 12,95 x 2,79 mm
- 4 FX3 functions - 0.5 amps maximum total
- Digitrax LocoMotion: BEMF, silent operation, torque compensation
- Transponding
How to install
You can now add layouts you create in the Shop Admin into any post or page. To make it simple a Shortcode Generator is included. You can access it via this button.
The first button is the shortcode genreator launcher and the second one ( the one with a plus ) ads a single audio player to the page from the media gallery.