Furniture listing
Preview
- Automatic reversing for one reversing section or sub-district.
- DCC Occupancy Detection for 1 Auto-Reversing Section letting you know when equipped rolling stock is in a detection section on your layout.
- Integrated Transponding Zone lets you know the location of transponder-equipped locos or rolling stock.
- Intelligent Automatic short-circuit and over-current power management, improves reliability by avoiding most booster shutdowns.
- Connects to LocoNet to transmit Detection Section occupancy, Transponding and track power information.
- Detects most powered locomotives in a Detection Section.
- Detects rolling stock equipped with resistor wheel sets.
- Identify where specific rolling stock is on your layout with Digitrax transponder-equipped locos and rolling stock.
- Plug and Play with Digitrax DCC systems.
- LED indication of Detection Section occupancy, Transponding, power status, and reversing section status.
- Additional connections for opto-isolated occupancy detector output, manual power control, and remote status indicator.
- Easy-connect pluggable track wire terminal blocks can plug-in straight or at right angles.
- Operations Mode Read Back allows you to read CV values of decoders equipped with transponders when on track.
- Firmware update capability via IPL over LocoNet.
- Wi-Fi interface to a Digitrax LocoNet for up to four compatible mobile Wi-Fi devices and Apps.
- Compatible with most Android and Apple devices running supported throttle apps
- Easy Setup and Configuration. A single LNWI works ‘out of the box’, with no additional configuration required.
- Provides up to 32 LocoNet Throttle functionality per LNWI, with compatible apps and Command Station.
- Up to 8 LNWI can be supported per LocoNet
- Multiple LNWI units automatically resolve SSID with no additional configuration
- Optional Wi-Fi WPA security for layout operations in public.
- Option switches to fully customize all device settings
- LocoNet Compatible
- DCC Occupancy Detection supports up to 8 Detection Sections letting you know when equipped rolling stock is in a detection section on your layout.
- One Transponding Zone per Detection Section lets you know the location of transponder-equipped locos or rolling stock.
- Intelligent Automatic short-circuit and over-current power management for each Detection Section, improves reliability by avoiding most booster fault shutdowns.
- Connects to LocoNet to transmit Detection Section occupancy, Transponding and track power information.
- Supports SuperSonic Decoder Operations.
- Detects any powered locomotives in a Detection Section.
- Identify where specific rolling stock is on your layout with Digitrax transponder-equipped locos and rolling stock.
- Detects rolling stock equipped with resistor wheel sets.
- Plug and Play with Digitrax DCC systems with automatic Railsync polarity detection.
- LED output headers for front panel indication of Detection Section occupancy, Transponding, and power status.
- Easy-connect pluggable track wire terminal blocks can plug-in straight or at right angles.
- 3 Amp capacity per Detection Section , 8 Amp total unit capacity.
- Automatically updates status at track power on.
- Operations Mode Read Back allows you to read CV values of decoders equipped with transponders when on track.
- Firmware update capability via IPL over LocoNet.
- High-efficiency power supply
- 15 VDC output
- Accepts different cord sets
- Meets MEPS VI and DOE VI efficiency standards
- CE for EM compatibility and IEC 60950, UL, and FCC safety requirements
- Full galvanic isolation of output voltage from AC input
- RoHS environmentally sensitive manufacturing
- Compact and lightweight
- Power indicator light
- Black Color Matches Original Plugs Shipped with DB220 Boosters
- Replacement for lost or damaged booster terminal connectors
- Specifically for DB220, compatible with all Digitrax Boosters/Command Stations
- Dual 3/5/8 Amp AutoReversing DCC Booster
- Up to 16 Amps of power total
- N, HO, & Large Scale Operations with Custom Voltage Trim
- LocoNet for easy plug ‘n play installation and system expansion
- Easy dip switch setup
- Auto resetting over temperature and short circuit protection
- Track status indicators
- Stabilized track drive output
- Over-voltage protected
- Auto-Shutdown when command control signal is lost to prevent “runaway” trains
- IPL updatable
- Single 3/5/8 Amp AutoReversing DCC Booster (no command station capability)
- Up to 8 Amps of power total
- Opto-Isolated for layouts with common rail wiring
- N, HO, & Large Scale Operations with Custom Voltage Trim
- LocoNet for easy plug ‘n play installation and system expansion
- Easy dip switch setup
- Auto resetting over temperature and short circuit protection
- Track status indicators
- Stabilized track drive output
- Over-voltage protected
- Auto-Shutdown when command control signal is lost to prevent “runaway” trains
- IPL updatable
- Single 3/5/8 Amp AutoReversing DCC Booster (no command station capability)
- Up to 8 Amps of power total
- N, HO, & Large Scale Operations with Custom Voltage Trim
- LocoNet for easy plug ‘n play installation and system expansion
- Easy dip switch setup
- Auto resetting over temperature and short circuit protection
- Track status indicators
- Stabilized track drive output
- Over-voltage protected
- Auto-Shutdown when command control signal is lost to prevent “runaway” trains
- IPL updatable
- DCS210+ Command Station/Booster With Intelligent AutoReverse
- DT602D Super LocoNet Throttle
- UR93 Duplex Radio Transceiver Panel
- PS615 Power Supply
- PS14 Power Supply (For UR93)
- Evolution Manual
- Works with compatible LocoNet systems
- Color 2.4” LCD Display Screen
- Full Duplex radio when paired with a UR92 or compatible Duplex Transceiver (sold separately)
- Advanced menu system and displays
- Built-in scrolling help and prompting
- Soft ON/OFF switch, with zero OFF power-drain
- Advanced display Power Saving for longer wireless battery operation
- Throttles are now powered in wireless modes by 3 AA cells! No more 9V batteries to remove!
- Can use recharged AA batteries
- Works in standard tethered, IR or Radio Duplex modes
- Duplex Scan for available Networks and radio signal strength. Run without cords!
- All throttles come with a LocoNet cord that can be unplugged, and is replaceable
- Dual throttle controls let you control two locos simultaneously
- Run locomotives with “encoder click” knobs for both speed and direction control
- Full numeric keypad makes loco selection simple
- Control light and sound effects functions with the press of a button
- Control 29 functions (F0-F28).
- Function active/inactive indicators
- Convenient step-by-step throttle option set up
- Supports simplified decoder programming
- Simplified 2 or 4 digit addressing setup
- Over 9,000 locomotive decoder addresses
- Supports turnout and stationary decoder control
- Over 2000 turnout decoder addresses
- Fast clock display
- Recall feature
- Advanced Route editor
- Run up to 100 addresses at the same time on your system.
- Run up to 100 throttles at the same time on your system.
- Address 00 for operation of one loco or MU consist without decoders
- Two Digit Addressing is easy to use. (Address 01-127)
- Four Digit Addressing lets you use the road number of your engines as their addresses. (Address 0128-9000+)
- Selectable Scale Voltage for Safe Operation in ALL Scales
- Customizable Voltage Settings
- 5 amps of power with included PS615 power supply
- 8 amps with PS2012E power supply (sold separately)
- Control 29 functions (F0-F28).
- Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
- Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder capabilities).
- Use one output for programming decoders while the other runs the layout. No need to shut down the layout to program decoders!
- Use one output for a braking section while the other runs the layout.
- Built in read/write programmer lets you program and read back CV values.
- Supports Paged programming (Digitrax preferred method). Also supports direct, register and ops mode programming
- Supports Universal consisting (Digitrax preferred method). Allows ALL locos to be consisted prototypically, even analog locos.
- Advanced consisting and Basic consisting, too!
- Nested consisting where consists can be consisted together.
- Access to stationary decoder control for turnouts and other devices.
- DT602 reports turnout position based on last command sent.
- Control 2000+ stationary decoder addresses.
- Turnout List/Route capability to simplify complex yard operations.
- EZ routes button for simplified Command Station route programming
- Turn audible warnings on or off.
- Set up purging options.
- Multi-format command station mode.
- Loco Reset button for easy system purging
- Digitrax Duplex Radio Transceiver on LocoNet wire infrastructure (no IR support).
- More than double the radio range of UR92 Duplex units.
- Plug and Play setup, PS14 Universal power supply included.
- Compatible to be mixed with UR92 LocoNet Duplex Radio systems, for added coverage and reception.
- Status LEDS.
- Supports combinations of DT602D/DE and DT500D, DT400D and UT4D Duplex Radio throttles.
- UR93E available for countries that require EN-300-328 Wireless conformity.
- Evolution is just the beginning for large, complex layouts that emphasize prototypical operations.
- With LocoNet you can add more boosters, throttles, power management, detection, transponding, signaling and much more.
- DCS210+ comes with 3 LocoNet ports for easy expandability and a USB Interface!
- IPL updatable firmware for continued product improvements
- Device Query and Device Statistics to help with troubleshooting
- Input Mode to help set up detection on your layout
- Uses Expanded slots
- Australia
- European Union
- Germany
- Ireland
- New Zealand
- South Africa
- United Kingdom
- 1 amp operating; 1.5 amp peak motor current
- 2 FX3 functions - 0.5 amps maximum total
- includes 2 Golden White LED lights
- Digitrax LocoMotion
- Back EMF motor control
- silent motor operation
- torque compensation
- Transponding
How to install
You can now add layouts you create in the Shop Admin into any post or page. To make it simple a Shortcode Generator is included. You can access it via this button.
The first button is the shortcode genreator launcher and the second one ( the one with a plus ) ads a single audio player to the page from the media gallery.