Furniture listing
warning: this is not how to include the shop layout in a page, please read docs
Preview
Filtering byRegulators
Image
name
description
category
price
|
Type |
Description |
Select All |
|---|
|
Category |
|
Mfr |
|
|
|
Series |
|
|
|
Package |
Tube
|
|
Product Status |
Active
|
|
|
Type |
Linear Regulator Replacement
|
|
|
Number of Outputs |
1
|
|
|
Voltage - Input (Min) |
7V
|
|
|
Voltage - Input (Max) |
28V
|
|
|
Voltage - Output 1 |
|
|
|
Voltage - Output 2 |
-
|
|
|
Voltage - Output 3 |
-
|
|
|
Current - Output (Max) |
1A
|
|
|
Power (Watts) |
3 W
|
|
|
Applications |
ITE (Commercial)
|
|
|
Features |
SCP
|
|
|
Operating Temperature |
-40°C ~ 85°C
|
|
|
Efficiency |
91%
|
|
|
Mounting Type |
Through Hole
|
|
|
Package / Case |
3-SIP Module
|
|
|
Size / Dimension |
0.46" L x 0.33" W x 0.41" H (11.6mm x 8.5mm x 10.4mm)
|
|
|
Control Features |
-
|
|
|
Base Product Number |
|
$5.09
These boost (step-up) voltage regulators generate higher output voltages from input voltages as low as 2.5 V. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters) and have a typical efficiency between 80% to 90%. The available output current is a function of the input voltage, output voltage, and efficiency (see Typical Efficiency and Output Current section below), but the input current can typically be as high as 1.4 A. This regulator is available with a fixed 5 V, 9 V, or 12 V output:
$3.95
296-12602-1-ND IC REG LINEAR ADJ 1.5A SOT223-4
$0.98
XL6009 DC-DC up/down voltage regulator (buck/boost driver). Input: 4-32V, 1.2A continuous current. 3A max. Output: 1.25-35V adjustable. 1.90" x 0.98" x 0.5". Mounting holes.
$9.95
Non Isolated, LM2596 Buck (Step Down) adjustable DC/DC Converter, switching Regulator board. Ideal Point-of-Use regulator
Input: 4.5-40VDC
Output: 1.5-37VDC
Rated Current: 2A (Heatsink Required above 10W)
Regulation: 0.5%
SKU: 30148 PS
$5.95
| Voltage - Input (Max) | 25V | |
|---|---|---|
| Voltage - Output (Min/Fixed) | 1.8V | |
| Voltage - Output (Max) | - | |
| Voltage Dropout (Max) | 0.7V @ 2A | |
| Current - Output | 2A | |
| Current - Supply | 120µA | |
| PSRR | 55dB (120Hz) | |
| Control Features | Enable | |
| Protection Features | Over Current, Over Temperature, Over Voltage | |
| Operating Temperature | -40°C ~ 125°C | |
| Mounting Type | Surface Mount | |
| Package / Case | TO-263-6, D²Pak (5 Leads + Tab), TO-263BA | |
| Supplier Device Package | HRP-5 |
$2.39
| Regulator Topology | Positive Fixed |
|---|---|
| Voltage - Output | 12V |
| Current - Output | 1A |
| Voltage - Dropout (Typical) | 0.3V @ 500mA |
| Number of Regulators | 1 |
| Voltage - Input | Up to 25V |
| Current - Limit (Min) | - |
| Operating Temperature | -40°C ~ 125°C |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Supplier Device Package | TO-252-3 |
| Online Catalog | > 5V |
$1.89
9 Volt Regulator
| Voltage - Output | 9V |
|---|---|
| Voltage - Input | Up to 35V |
| Voltage - Dropout (Typical) | 2V @ 1A |
$1.49
5 Volt Regulator
| Voltage - Output | 5V |
|---|---|
| Voltage - Input | Up to 35V |
| Voltage - Dropout (Typical) | 2V @ 1A |
$1.49
The VR1.5 will take power from the positive 12v (blue wire) and the negative (black w/ white stripe wire) from your decoder and output a steady, highly accurate 1.5 volts on the tan wire. This is ideal for working with 1.5v bulbs in situations where resistors are unwanted or unusable. Designed specifically for use with the T4X and T6X, the VR1.5 can be used with any decoder where the the ground and common are available for wire attachment.
Dimensions: .7” x .425” x .16” or 17.78mm x 10.795mm x 4.064mm
$14.36
How to install
You can now add layouts you create in the Shop Admin into any post or page. To make it simple a Shortcode Generator is included. You can access it via this button.
The first button is the shortcode genreator launcher and the second one ( the one with a plus ) ads a single audio player to the page from the media gallery.
