Furniture listing
warning: this is not how to include the shop layout in a page, please read docs
Preview
Filtering byTool Crib
Image
name
description
category
price
Similar to other models but with self-adjusting clamping fixtures, which hold the wire perpedicular to the jaws. Greatly simplifies the cutting process while allowing for flat cuts on both the cut and cut-off sides of the wire.
Can be used to cut memory wire, silver, gold and copper wire. Also good for cutting twisted throttle cable. Cuts music wire up to 0.064" diameter.
$31.40
Bearing Reamers (Set of Two) – HO
These little tools will make a big difference to how many coaches or wagons your loco can pull. – They smooth the (usually) imperfect coning of the axle bearings in trucks/bogies greatly lowering friction. Two types, one with centre roller for standard freight bogies/trucks, and one with twin finger-rollers for bogies/trucks with a centre bolster for couplers. A low cost tool with huge benefits to those who care about performance!
Suitable for European HO and US HO models with 24.25 to 25.25mm axles.
$14.39
Coupler Trip Pin Pliers
For HOn3, HO, S, On3 & O Scale Couplers. Adjust trip pin to the correct height by gently squeezing with these specially designed pliers. The pliers have jaw surfaces that are curved and smooth. Adjusting the height of your Coupler Trip Pins is easier because the pliers surfaces conform to the bend of the trip pins and prevent them from kinking when bending or straightening.
$15.43
5 Prong Jaw Excellent for handling small parts. Grab, lift, pull, pick and place small, difficult-to-grasp items.
$7.75
There are many modelers that wish to manual uncouple with a small tool and Kadee® offers the #241 "Dual Tool" manual uncoupler and spring pick combination. For manual uncoupling the #118 & #119 shelf coupler the #241 has a "pointed" end to fit around the top shelf. The other "blade" end of the #241 is for standard couplers, also, the blade end has nubs so it can double as a spring pick for inserting small coil springs. To manual uncouple the #118 & #119 coupler with the pointed end of the #241 "Dual Tool", first push the cars together where the coupler knuckles compress against each other, insert the pointed end against the "outside" of the hooked tip of the knuckle as illustrated (the knuckle is the moving part of the coupler head). As the point slips into the coupler it will push the knuckle past the hook of the opposing knuckle. To assist the uncoupling you can push the knuckle tip outward with the point, when the knuckle tips are past each other you can now separate the uncoupled cars.
One Each
UPC: 765484002413
$2.87
A colorless, liquid, plastic-fusing adhesive. Dissolves a thin layer of each surface to form a welded joint as strong as the
surrounding area. Bonds styrene, ABS, butrate and acrylics.
$4.55
Product Information
Easy way to remove dust from track and stop further accumulation.
* Hangs from axle out of sight * Use during regular operation * Works in forward and reverse
$9.95
Can be used to pull electrical plugs from decoders
| Capacity: | 0.017, 0.025 (Soft Copper Wire), 0.034 (Steel Wire)" |
| Cut: | Flush |
| Cutting Wire Range: | 22-25 (Soft Copper Wire), 20 (Steel Wire) AWG |
| Head Thickness: | 9/32" |
| Head Width: | 7/16" |
| Jaw Length: | 1 |
$29.95
SPECIAL ORDER
Litchfield Station, LLC recommends these inexpensive guides to keep your track radius constant and provide smooth transitions in your track work.
$5.59
How to install
You can now add layouts you create in the Shop Admin into any post or page. To make it simple a Shortcode Generator is included. You can access it via this button.
The first button is the shortcode genreator launcher and the second one ( the one with a plus ) ads a single audio player to the page from the media gallery.
