new layout
Preview
- Acquiring power for track-powered DCC decoders or other modules
- Improving the power pickups for some locomotives that benefit from improved electrical pickups in the tender
- Acquiring power for track-powered DCC decoders or other modules
- Improving the power pickups for some locomotives that benefit from improved electrical pickups in the tender
- Dimensions: 16 x 9.5 x 5mm
- Function Outputs: 6
- Max Function Current: 100mA (ea. Output
- ALCo PA
- Back EMF Load Compensation:
- Quiet Drive:
- DC Mode:
- RailCom®:
- Variable Momentum:
- LED Support:
- Function Remapping:
- Programmable Lighting Effects:
- Dimmable Brightness:
- Decoder Lock:
- User-Loadable Speed Tables:
- 9G mini servo system for turnout or motion control.
- Under layout mounting bracket included.
- Compact install for tight N scale switches, and decks.
- Includes pre-formed drive wires.
- Supplied with mount hardware.
While LokPilot 5 decoders can undoubtedly meet all imaginable requirements of even the most demanding experts, many model railway eras are looking for a robust, high-quality DCC decoder for your standard requirements, which should also be affordable.
The LokPilot 5 Basic was developed with the aim of offering a modern decoder with a reasonable range of functions at a reasonable price.
The LokPilot 5 Basic comes in two versions: In addition to a version with an 8-pin NEM interface, a version with 21MTC interface is also available. This makes the LokPilot 5 Basic particularly suitable for use in track H0 vehicles.
Modes
The LokPilot 5 Basic is a "pure-bred" DCC decoder. 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses. Up to 20 functions can be triggered. Thanks to RailComPlus®, the decoders log in fully automatically to a suitable digital center.
It masters all DCC programming modes and thanks to RailCom® the CV values can be read out on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.
The LokPilot 5 Basic Decoder detects the Märklin® brake distances as well as the Lenz® ABC system. Braking with DCC brake blocks or dc voltage is also possible.The LokPilot 5 Basic Decoder can be used on analog DC webs. The maximum speed can be set separately.The decoder switches "on-the-fly" fully automatically between operating modes. Most of the time, nothing needs to be adjusted.
Functions
The LokPilot 5 Basic has 4 reinforced function outputs in each version. In the 21MTC interface, there are 8 logic-level outputs at the interface, two of which are also suitable for controlling servos. All important lighting functions are available. The brightness of each output can be set separately.
Motor
The motor control of the LokPilot 5 Basic delivers up to 0.9A continuous current. A variable PWM clock frequency from 10kHz to 50kHz ensures super-quiet operation, especially for bell anchor motors – The typical "hum" is a thing of the past. The load control can be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function allows the decoder to be automatically measured against the motor.
- 10 Exhaust Chuffs
- Up to 12 Prime Movers in each sound profile
- Up to 12 Bells
- 90 Whistles
- 40+ Airhorns
- Additional couplers, dynamos, cab chatter and more!
Dimensions: | 41.9 x 18.8 x 6.8mm |
Max. Motor Stall Current: | 2A |
Max. Function Current: | 100mA (each output) |
Function Outputs: | 6 |
Audio Amplifier: | 2 Watt, 8-Ohm Load |
DCC Track Voltage: | 7.5V – 22V |
Sound Channels: | 16 |
- 10 Exhaust Chuffs
- Up to 12 Prime Movers in each sound profile
- Up to 12 Bells
- 90 Whistles
- 40+ Airhorns
- Additional couplers, dynamos, cab chatter and more!
Dimensions: | 41.9 x 18.8 x 6.8mm |
Max. Motor Stall Current: | 2A |
Max. Function Current: | 100mA (each output) |
Function Outputs: | 6 |
Audio Amplifier: | 2 Watt, 8-Ohm Load |
DCC Track Voltage: | 7.5V – 22V |
Sound Channels: | 16 |
- Back EMF Load Compensation:
- Quiet Drive:
- DC Mode:
- Variable Momentum:
- Incandescent Bulb Support:
- Function Remapping:
- Programmable Lighting Effects:
- Dimmable Brightness:
- Decoder Lock:
- Airwire™ Compatible:
- User-Loadable Speed Tables:
- Back EMF Load Compensation:
- Quiet Drive:
- DC Mode:
- Variable Momentum:
- Incandescent Bulb Support:
- Function Remapping:
- Programmable Lighting Effects:
- Dimmable Brightness:
- Decoder Lock:
- Airwire™ Compatible:
- User-Loadable Speed Tables:
How to install
You can now add layouts you create in the Shop Admin into any post or page. To make it simple a Shortcode Generator is included. You can access it via this button.
The first button is the shortcode genreator launcher and the second one ( the one with a plus ) ads a single audio player to the page from the media gallery.