new layout

warning: this is not how to include the shop layout in a page, please read docs

Preview

Filtering by Clear filters
The TSU-Big Steam is a limited edition decoder available in 3 board formats. This decoder features a true UP Big Boy recording! Previously this sound file was only offered in Athearn factory installed decoders, but now you can get it on our web store. This decoder is available in 3 board formats: TSU-1100, TSU-2200, and TSU-21PNEM8. You will also get all of the features that you know and love from our Tsunami2 decoder line including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: bells (12), Whistles (90+), couplers, dynamos and more! DYNAMIC DIGITAL EXHAUST  For added realism, you’ll love our reactive Dynamic Digital Exhaust (DDE) feature. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Tsunami2 the ability to create the most realistic experience possible. HIGH QUALITY SOUND LIBRARY Our large selection of high quality sound effects include:
  • 10 Exhaust Chuffs
  • Up to 12 Prime Movers in each sound profile
  • Up to 12 Bells
  • 90 Whistles
  • 40+ Airhorns
  • Additional couplers, dynamos, cab chatter and more!
ADDED REALISM Additional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more. EASY INSTALLATION The TSU-2200 can simply plug into models equipped with a DCC quick plug. Our 9-Pin JST to NMRA 8-Pin Wiring Harness (P.N. 810135) can also be use to plug the TSU-2200 into models equipped with an NMRA 8-Pin plug. The TSU-2200 can also be wired into a large variety of models. The TSU-21PNEM8 simply plugs into models equipped with a 21-pin NEM socket. SKU:  884012
$107.16
The PX108 series power extender offers the same great features of other Digitrax Power extenders. The PX108 is offered in a shorter package while still providing approximately 70% of the holdup of the larger PX112. Additionally, the PX108 is operational at a wider range of voltages, from 10v to 18v. The PX108 measures 1.007” x 0.492” x 0.299” (25.6mm x 12.5mm x 7.6mm) excluding the harness.
$24.80
You can install this Wi-Fi/DCC NCE CAB Bus Interface on your layout to provide Wi-Fi Control of trains using your NCE DCC Equipment. Control Trains using popular apps such as WiThrottle on Apple, Engine Driver on Android or, if you don't like phones, the popular TCS UWT-100 Universal Wi-Fi Throttle. This NCE CAB Bus-Compatible product will work with any NCE Command Station such as Power Pro, Smart Booster and Power Cab. The unit acts as a WiThrottle server using Hoffman's WiThrottle protocol, just like JMRI, with optional loco roster and turnout list. YOU DON'T NEED TO INSTALL JMRI ANYWHERE - just connect to your NCE command station, install a recommended App on your Apple iPhone/iPad, or your Android phone/tablet, connect to the device and start driving trains.
$88.00
This kit includes all the necessary electronics to add sound, motor, and light control to your G scale locomotive and will allow control with analog (DC) power supply. It also has magnet pickup so you can place magnets in your track for the purpose of playing a sound or turning on a light effect when the train goes over the magnets. Further you can Radio Control a locomotive with this kit installed if you obtain a RailPro handheld controller. You can download new sounds and light effects using the built in Direct Radio!
$199.99

The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all characteristics, however, the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility comes with a cheaper price.

LokPilot 5 decoders are offered with all common interfaces.

Modes

The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus® the decoders register automatically with a suitable DCC system like the ESU CabControl.

The decoder accepts all DCC programming modes and thanks to RailCom® the CV values ​​can be read on the main track with RailCom equipped DCC systems. For command stations that only program the CVs from 1-255 auxiliary CV registers exist.

The LokPilot 5 DCC decoder recognizes the Märklin® braking sections as well as the ZIMO® HLU / ZACKCommands or the Lenz® ABC system. Also braking with DCC brake modules or with DC voltageis possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle trainenables automatic commuting between two train stations.

The LokPilot 5 DCC decoder can be used on analog DC trains. The top speedcan be set separately.

The decoder switches between the operating modes fully automatically "on-the-fly".

Features

We know that you want your locomotives to be as realistic as possible. Therefore we have the LokPilot 5DCC packed with function outputs. Depending on the interface version, each LokPilot offers 5 DCCDecoder at least 10 amplified function outputs with 250mA output current each. In the executionswith PluX22 or 21MTC interface there are 4 outputs to control servos orLogic level outputs added. All-important lighting functions are available. The brightness of each outputcan be set separately. The decoder masters automatic pushing and pullingwhen uncoupling for ROCO®, Krois® and Telex® couplings.

Motor control

The engine control of the LokPilot 5 DCC has been fundamentally improved again. A variably adjustablePWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors.Operation - The typical “hum” is a thing of the past. The load control now has up to10 CVs  which can be adjusted for difficult cases. The unique "Autotune" function enablesthe automatic calibration of the decoder to the motor. The LokPilot 5 DCC decoder delivers up to 1.5A of motor current. Enough juice even for older motors.

Operational safety

On request, a PowerPack can be fitted to the LokPilot 5 DCC to bridge dirty rail sections.

Protection

Of course, all function outputs and the motor output are protected against overload.

We want you to enjoy your decoder for as long as possible.

SKU:  59659
$29.52



How to install

You can now add layouts you create in the Shop Admin into any post or page. To make it simple a Shortcode Generator is included. You can access it via this button.

The first button is the shortcode genreator launcher and the second one ( the one with a plus ) ads a single audio player to the page from the media gallery.