new layout

warning: this is not how to include the shop layout in a page, please read docs

Preview

Filtering by Clear filters
The AM-1S is a module that you can install on your model train layout to control Accessory Projects.  You can control a turntable, swing bridge, oil pumps, lights in buildings, and much more!!! YThe AM-1S can be controlled and setup by a Ring Engineering RailPro Controller, such as the HC-2 Handheld Controller.  The AM-1S is not for use with turnouts.  Please use AM-1 for turnout control.
$79.99

The PSXX is designed to specifically handle low power starter systems:

 
    • NCE Power Cab
 
    • Digitrax Zephyr
 

The PSXX has a default trip rate of 2.0 amps

 
    • The PSXX series has the most reliable operating features that protect model railroad equipment and wiring from damage during a short circuit, including fast-acting, solid-state electronics.
 
    • The Power Shields are available in 1, 2, and 3 circuit-breaker models, allowing you to divide the output of a single booster into independent power districts.
 
    • The PSXX circuit board is wired between the DCC system’s booster and the track bus.
 
  • The PSXX includes screw terminals for easy connections from the booster and to the track. There is also an extra pair of terminals for linking the booster power input wires to additional PSXX breakers should you need to add extra PSX protected power districts.
$99.90
Mini snap-in, 3 digit Red LED panel Voltmeter. Self contained for source monitoring in battery, solar and control circuits Operating Voltage: 4.5-30VDC Input Range: 4.5-30V Resolution: .1/.01 Auto Range Character Height: 0.56in. 6” wire leads. Cutout Size: 46mm X 27mm W: 1-7/8” H: 1-1/8” D: 7/8” WT: .04 4
$12.95
The HC-3 is a wireless controller with a color touch screen that can be used to operate your model railroad layout. The HC-3 can control the speed, direction, lights, and sounds of locomotives and other accessories by simply touching the screen! RailPro products are equipped with Direct Radio and are designed to work together. Direct Radio allows the RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your controls. You will need to install RailPro modules into your locomotives and accessories that you want to control. The color graphic screens make it so simple to use, that most users will find it unnecessary to use the manual to even setup advance features.
$239.95

HC-3-SUN (Extra Bright Screen to be Usable in Outside Sunlight)

The HC-3 is a wireless controller with a color touch screen that can be used to operate your model railroad layout. The HC-3 can control the speed, direction, lights, and sounds of locomotives and other accessories by simply touching the screen! RailPro products are equipped with Direct Radio and are designed to work together. Direct Radio allows the RailPro components to communicate with each other without any wires! Direct Radio is very fast giving your RailPro products quick response to your controls. You will need to install RailPro modules into your locomotives and accessories that you want to control. The color graphic screens make it so simple to use, that most users will find it unnecessary to use the manual to even setup advance features.

$259.95
The Blunami BLU-4408 The BLU-4408 is designed to wirelessly operate models with higher stall currents such as some S, O, and large-scale locomotives; this decoder features easy-to-use terminal blocks for no-fault wiring and a higher audio amplifier for awesome volume, indoors or out. Blunami decoders can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! Need Help Choosing a Sound Profile? We have tons of sounds to match a wide range of locomotives. So many, in fact, we cannot fit them all on one decoder. Therefore, they are broken up into sound profiles of like sounds (Steam, EMD, GE, Electric, etc.). If you don't know which sound profile you need, the best place to start is the Sound Selection References. These will list all the prime movers or exhaust chuffs available on each sound profile. DYNAMIC DIGITAL EXHAUST  For added realism, you’ll love our reactive Dynamic Digital Exhaust (DDE) feature. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Tsunami2 the ability to create the most realistic experience possible. HIGH QUALITY SOUND LIBRARY Our large selection of high quality sound effects include:
  • 10 Exhaust Chuffs
  • Up to 12 Prime Movers in each sound profile
  • Up to 12 Bells
  • 90 Whistles
  • 40+ Airhorns
  • Additional couplers, dynamos, cab chatter and more!
ADDED REALISM Additional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more. EASY INSTALLATION No soldering required! This decoder features easy-to-use terminal blocks for no-fault wiring. This 4-amp, universal-style format decoder includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.
Dimensions: 69 x 30.5 x 14mm
Max. Motor Stall Current: 4A
Max. Function Current: 400mA (each output)
Function Outputs: 8
Audio Amplifier: 3 Watt, 8-Ohm Load
DCC Track Voltage: 7V – 27V
Sound Channels: 16
$204.76
TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.   The KA5 includes an additional fifth supercapacitor, increasing the maximum capacity and peak charging voltage compared to a KA3 or KA4. The KA5 will power an HO-Scale locomotive with headlights on for approximately 6 to 20 seconds (depending on the locomotive and the efficiency of the motor).   This Keep-Alive® includes a Blue and a Black w/ White Stripe wire to attach it to a decoder. SKU:  1669
$25.56
CS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.   The KA5 includes an additional fifth supercapacitor, increasing the maximum capacity and peak charging voltage compared to a KA3 or KA4. The KA5 will power an HO-Scale locomotive with headlights on for approximately 6 to 20 seconds (depending on the locomotive and the efficiency of the motor).   This Keep-Alive® includes a Blue and a Black w/ White Stripe wire to attach it to a decoder. SKU:  2006
$25.56
TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.   The KA5 includes an additional fifth supercapacitor, increasing the maximum capacity and peak charging voltage compared to a KA3 or KA4. The KA5 will power an HO-Scale locomotive with headlights on for approximately 6 to 20 seconds (depending on the locomotive and the efficiency of the motor). This Keep-Alive® includes a Blue and a Black w/ White Stripe wire to attach it to a decoder. The WAUX-KA1 includes the auxiliary harness for the WOW101 sound decoder line with a KA1 Keep-Alive® device attached.   This harness can be used to connect the following functions to a WOW101 decoder:  
  • 2x Purple wires for Speaker + and Speaker -
 
  • Blue wire for connecting light functions and Keep Alive®
 
  • Black with White stripe wire for connecting Keep-Alive®
 
  • Tan wire for CAM input
 
  • Pink wire for Function Output 4
 
  • Brown wire for Function Output 3
  The WAUX-KA5 is designed for use with the TCS WOW101 ONLY. SKU:  1685
$30.36



How to install

You can now add layouts you create in the Shop Admin into any post or page. To make it simple a Shortcode Generator is included. You can access it via this button.

The first button is the shortcode genreator launcher and the second one ( the one with a plus ) ads a single audio player to the page from the media gallery.