new layout

warning: this is not how to include the shop layout in a page, please read docs

Preview

Filtering by Clear filters
Controls turnouts from above or below the layout. Includes two SPDT add-on sets of contacts and needed hardware. Operates on 6-32V.
$8.95
Atlas Switch Machines are made to convert manual Code 100 Snap Switch turnouts to remote control. These solenoid turnout motors are available for several Atlas turnouts as well as under-table versions. Control Box 150-56 (sold separately) allows use of standard three-wire wiring, and other single-pole, double-throw momentary electrical switches may be used (not included). Switch Machines are part of the line of Atlas HO Scale Code 100 track.
$10.76
Atlas Switch Machines are made to convert manual Code 100 Snap Switch turnouts to remote control. These solenoid turnout motors are available for several Atlas turnouts as well as under-table versions. Control Box 150-56 (sold separately) allows use of standard three-wire wiring, and other single-pole, double-throw momentary electrical switches may be used (not included). Switch Machines are part of the line of Atlas HO Scale Code 100 track.
$12.20
Atlas HO Scale Code 100 Snap Track features black ties and nickel-silver rail. It's perfect for modelers of all skill levels looking for high-quality, prototypical-looking track. Black ties feature molded centerline nail holes for easy mounting with No. 150-2540 track nails. Fully compatible with all Code 100 Snap Track and conventional Code 100 track systems. Adapter track joiners No. 150-551 are available so you can also use Code 83 track on the same layout if desired. The track geometry of Code 100 track matches that of Code 83 Snap Track, so Code 100 track can be substituted for Code 83 in various Snap Track track plans. Code 100 Snap Track is part of the extensive line of Atlas HO Scale Code 100 track.
$4.68
Atlas HO Scale Code 100 Snap Track features black ties and nickel-silver rail. It's perfect for modelers of all skill levels looking for high-quality, prototypical-looking track. Black ties feature molded centerline nail holes for easy mounting with No. 150-2540 track nails. Fully compatible with all Code 100 Snap Track and conventional Code 100 track systems. Adapter track joiners No. 150-551 are available so you can also use Code 83 track on the same layout if desired. The track geometry of Code 100 track matches that of Code 83 Snap Track, so Code 100 track can be substituted for Code 83 in various Snap Track track plans. Code 100 Snap Track is part of the extensive line of Atlas HO Scale Code 100 track.
$10.27

List of Features:

This is a comprehensive list of the highlighted features available in the UWT-50, and does not reflect or include all of the features found in the UWT-50. Two Knob-Styles Select either a Potentiometer knob for a fixed starting and ending point, or the Encoder knob if you prefer infinite scrolling. Large, Full-text Screen 1.42" x 0.92" LCD screen with blue-ish-white backlight. Brightness is entirely adjustable for a variety of operating conditions. The UWT-50 screen has an identical resolution compared to the UWT-100. Programmable Buttons Two buttons on the face of the throttle, as well as two multi-position switches on the side can be reassigned to control many functions. Examples such as dynamic braking, manual notching, and higher-numbered functions are now a simple button press or switch flick away! Battery Power That Won't Leave You High-and-dry The UWT-50 is powered by two double a (AA) batteries, and support multiple chemistries including recharge-able, such as Alkaline, NiMH, LiPo, NiCd, and more! An easily-accessible battery compartment allows for quick, on-the-fly replacements so you're never stuck in a sticky situation waiting for your throttle to charge! (The yard master won't be happy to hear about that!) The UWT-50 lets you focus on what matters - running trains! Multiple Connection Modes You can connect to any DCC system using the WiThrottle protocol or a system-specific WiFi device, or communicate directly with your LCC network in LCC mode. In-Throttle Consisting Consisting doesn’t have to be difficult, intimidating, or complicated. The UWT-50 features a simple consisting interface where users can make, modify, and break up consists in mere seconds. Yard Mode Yard Mode is an innovative, TCS exclusive feature designed for switching operations and control. Perfect for spicing up repetitive yard moves! Full-Text Menus Menus present all options in full words and phrases. No guess work or manuals needed! Help Text Use the [?] button on the keypad in any menu to access help text for that menu item. The throttle will call up a relevant part of the manual or simple description of the selected operation. Help is always one button press away! Easily Update-able Update throttle software and add new features to your handheld from the comfort of your own home. Flashlight The UWT-50 unit comes equipped with two bright white LED's that can be activated at any time - handy for finding those dropped screws and lost detail parts, decoupling during nighttime operations, and ventures under dark, cavernous benchwork!
The TCS UWT-50 works seamlessly with our Command Station and UWT-100.
$199.95
Replaces item #397-54640

The LokPilot 5 L finds its place wherever the LokPilot 5 no longer “fits” in terms of performance. Ideally, these are vehicles of nominal size 0, but also gauge 1 vehicles that are to be equipped without noise are conceivable application scenarios. The LokPilot 5 L is mechanically compatible with the LokSound 5 L decoder and has the same connection pins.

Modes

The LokPilot 5 L is a real multi-protocol decoder. He masters the data format DCC as well as Motorola®, Selectrix® and M4. In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically.

It masters all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control centers. Auxiliary registers exist for control centers that can only program CVs from 1-255.

Motorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.

The M4 protocol enables automatic registration at mfx®-compatible control centers. All 32 possible function keys are offered here.

The LokPilot 5 L decoder recognizes the Märklin® braking sections as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.

The LokPilot 5 L decoder can be used on analog DC and AC railways. The maximum speed can be set separately.

The decoder switches between the operating modes fully automatically "on-the-fly". Usually nothing needs to be set.

Features

Each LokPilot 5 L comes with 11 amplified function outputs, each with a load of 500mA. In addition, there are 6 further logic level outputs, which can also control (2 pieces) RC servos or SUSI expansion modules on request. All important lighting functions are available. The brightness of each output can be set separately. The decoder masters the automatic pressing and detaching when uncoupling for ROCO®, Krois® and Telex® couplings. Two sensor inputs can trigger functions on request.

Motor control

The engine control of the LokPilot 5 L has been fundamentally improved again. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors - the typical "hum" is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function enables the decoder to be automatically calibrated to the motor. With up to 3.0A motor current, the LokPilot 5 L decoder provides enough juice even for older motors.

Operational safety

A PowerPack installed directly on the decoder helps to bridge dirty rail sections.

Protection

Of course, all function outputs and the motor output are protected against overload. We want you to enjoy your decoder for as long as possible.

SKU:  59325

$72.79
WOWKits provide everything needed for a complete sound installation. This WOWKit includes:
  1. A WOWSound decoder
  2. TCS motherboard with on-board Keep Alive®
  3. Speaker with enclosure, speaker wire, and JST speaker connector
Each WOWKit has been engineered for a perfect fit in your locomotive. Even if you are new to DCC or DCC installations, you can achieve Easy, Clean, Professional results using WOWKits. WOWKits make sound installation as simple and all-inclusive as possible. A list of compatible locomotives for this WOWKit can be found in the "Compatibility" tab. The TCS website features step-by-step installation pictures and instructions for each WOWKit. Visit the installation pages and search by locomotive, or follow the link in the "Compatibility" tab! SKU:  1743
$139.16
WOWKits provide everything needed for a complete sound installation. This WOWKit includes:
  1. A WOWSound decoder
  2. TCS motherboard
  3. Keep Alive® device
  4. Speaker with speaker wire and enclosure
Each WOWKit has been engineered for a perfect fit in your locomotive. Even if you are new to DCC or DCC installations, you can achieve Easy, Clean, Professional results using WOWKits. WOWKits make sound installation as simple and all-inclusive as possible. A list of compatible locomotives for this WOWKit can be found in the "Compatibility" tab. The TCS website features step-by-step installation pictures and instructions for each WOWKit. Visit the installation pages and search by locomotive, or follow the link in the "Compatibility" tab! SKU:  1742
$139.16
WOWKits provide everything needed for a complete sound installation. This WOWKit includes:
  1. A WOWSound decoder
  2. TCS motherboard with on-board Keep Alive®
  3. Speaker with speaker wire and enclosure
Each WOWKit has been engineered for a perfect fit in your locomotive. Even if you are new to DCC or DCC installations, you can achieve Easy, Clean, Professional results using WOWKits. WOWKits make sound installation as simple and all-inclusive as possible. A list of compatible locomotives for this WOWKit can be found in the "Compatibility" tab. The TCS website features step-by-step installation pictures and instructions for each WOWKit. Visit the installation pages and search by locomotive, or follow the link in the "Compatibility" tab! SKU:  1741
$139.16
WOWKits provide everything needed for a complete sound installation. This WOWKit includes:
  1. A WOWSound decoder
  2. TCS motherboard with on-board Keep Alive®
  3. Speaker with speaker wire
Each WOWKit has been engineered for a perfect fit in your locomotive. Even if you are new to DCC or DCC installations, you can achieve Easy, Clean, Professional results using WOWKits. WOWKits make sound installation as simple and all-inclusive as possible. A list of compatible locomotives for this WOWKit can be found in the "Compatibility" tab. The TCS website features step-by-step installation pictures and instructions for each WOWKit. Visit the installation pages and search by locomotive, or follow the link in the "Compatibility" tab! SKU:  1789
$139.16



How to install

You can now add layouts you create in the Shop Admin into any post or page. To make it simple a Shortcode Generator is included. You can access it via this button.

The first button is the shortcode genreator launcher and the second one ( the one with a plus ) ads a single audio player to the page from the media gallery.