new layout

/by
warning: this is not how to include the shop layout in a page, please read docs

Preview

Filtering by Clear filters
1788 For Walthers EMD E8A, Proto 2000 E7A, Life Like EMD E8A - #TCS-WDK-WAL-1
WOWKits provide everything needed for a complete sound installation. This WOWKit includes:
  1. A WOWSound decoder
  2. TCS motherboard with on-board Keep Alive®
  3. Speaker with speaker wire
  4. Motor mounting clip
Each WOWKit has been engineered for a perfect fit in your locomotive. Even if you are new to DCC or DCC installations, you can achieve Easy, Clean, Professional results using WOWKits. WOWKits make sound installation as simple and all-inclusive as possible. A list of compatible locomotives for this WOWKit can be found in the "Compatibility" tab. The TCS website features step-by-step installation pictures and instructions for each WOWKit. Visit the installation pages and search by locomotive, or follow the link in the "Compatibility" tab! SKU:  1788
$139.16
Add to cart
1923 for Bachmann Consolidation 2-8-0 with Vanderbilt Tender - #TCS-WSK-BAC-9
WOWKits provide everything needed for a complete sound installation. This WOWKit includes:
  1. A WOWSound decoder
  2. TCS motherboard
  3. Keep Alive® device
  4. Speaker with speaker wire and enclosure.
Each WOWKit has been engineered for a perfect fit in your locomotive. Even if you are new to DCC or DCC installations, you can achieve Easy, Clean, Professional results using WOWKits. WOWKits make sound installation as simple and all-inclusive as possible. A list of compatible locomotives for this WOWKit can be found in the "Compatibility" tab. The TCS website features step-by-step installation pictures and instructions for each WOWKit. Visit the installation pages and search by locomotive, or follow the link in the "Compatibility" tab! SKU:  1923
$139.16
Add to cart
1922 for Bachmann Spectrum Baldwin Ten Wheeler 4-6-0 - #TCS-WSK-BAC-8
WOWKits provide everything needed for a complete sound installation. This WOWKit includes:
  1. A WOWSound decoder
  2. TCS motherboard with on-board Keep Alive®
  3. Speaker with speaker wire
Each WOWKit has been engineered for a perfect fit in your locomotive. Even if you are new to DCC or DCC installations, you can achieve Easy, Clean, Professional results using WOWKits. WOWKits make sound installation as simple and all-inclusive as possible. A list of compatible locomotives for this WOWKit can be found in the "Compatibility" tab. The TCS website features step-by-step installation pictures and instructions for each WOWKit. Visit the installation pages and search by locomotive, or follow the link in the "Compatibility" tab! SKU:  1922
$139.16
Add to cart
1921 for Bachmann Spectrum K4 4-6-2 - #TCS-WSK-BAC-7
WOWKits provide everything needed for a complete sound installation. This WOWKit includes:
  1. A WOWSound decoder
  2. TCS motherboard with on-board Keep Alive®
  3. Speaker with speaker wire
Each WOWKit has been engineered for a perfect fit in your locomotive. Even if you are new to DCC or DCC installations, you can achieve Easy, Clean, Professional results using WOWKits. WOWKits make sound installation as simple and all-inclusive as possible. A list of compatible locomotives for this WOWKit can be found in the "Compatibility" tab. The TCS website features step-by-step installation pictures and instructions for each WOWKit. Visit the installation pages and search by locomotive, or follow the link in the "Compatibility" tab! SKU:  1921
$104.37
Add to cart
LocoNet® Advanced Command Station and 5amp/8amp Booster - #245-DCS240+
DCS240+ LocoNet® Advanced Command Station
  • Supports up to 400 locomotives and throttles.
  • On-board USB port.
  • Three RJ12 LocoNet ports
  • Supports SoundFX and sound decoder programming using Digitrax SoundLoader app over USB.
  • 5amp/8amp Booster with multi-scale capability.
  • Built-in booster transponding detection provides Operations mode CV read back.
  • Locomotive reset button.
  • EZ route setup button and system editable routes.
  • Improved Programming track.
  • Updated design.
$340.00
Add to cart
Signal Decoder - #245-SE74
SE74 Signal Decoder
  • Fully connectorized installation.
  • Optional support for DCC 9-Aspect control mode, including Lunars.
  • Easy setup with Option Switches and LocoNet programming.
  • Configurable for four solenoid or four slow-motion turnout control.
  • 8 Input lines for local control and sensors.
  • 8 System routes with 8 entries each.
  • Advanced LocoNet configuration capability with Series7 style installation support using a DT602.
$95.20
Add to cart
DC 3.3V to 12V Step-up Power Supply Boost Voltage Regulator Converter - #Reg-Booster12V
These boost (step-up) voltage regulators generate higher output voltages from input voltages as low as 2.5 V. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters) and have a typical efficiency between 80% to 90%. The available output current is a function of the input voltage, output voltage, and efficiency (see Typical Efficiency and Output Current section below), but the input current can typically be as high as 1.4 A. This regulator is available with a fixed 5 V, 9 V, or 12 V output:
$3.95
Add to cart
Mini Micro Sh 1.0 JST 2-Pin Connector Plug Male with 150Mm Cable - Fits Athearn boards - #Plug1.0JST
$2.59
Add to cart
LocoNet Universal Panel - #245-UP7
UP7 LocoNet Universal Panel:
  • Plug and Play Universal fascia panel supporting LocoNet.
  • Two RJ12 front panel Throttle jacks.
  • Three RJ12 rear pass-through LocoNet jacks
  • Supports throttle charging.
  • Fully connectorized installation.
  • 2mm rear plug for e.g. PS14 DC power supply.
  • 4-pin rear plug option to share DC power.
  • Track Status LED.
  • Updated design.
  • Replaces UP5 LocoNet Universal Interconnect Panel.
$15.20
Add to cart
HOn3 Rerailer Ramp - #RampRailerHOn3
$4.29
Add to cart
Dual 13x18-08 Speaker Assembly with Enclosure, two 8 ohm speakers wired in parallel for 4 ohms, 6" wires - #SP-26x18H10-04ENCW
$19.95
Add to cart
1674 MTC 21-pin HO-Scale Decoder, 8-function - #TCS-EU821
This decoder is designed specifically to meet the needs of European HO-Scale modelers. This decoder is compliant with the NEM660 standard found in locomotives equipped with the MTC 21-pin socket. The EU series decoders are compatible with all of TCS' motherboards, or any locomotive equipped with the MTC 21-pin socket.
  • Back EMF Load Compensation:
Provides superior slow speed control and high performance under load.
  • Quiet Drive:
Super-quiet motor control for "buzz" free motor performance.
  • DC Mode:
Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.
  • Variable Momentum:
Allows you to make custom acceleration and deceleration curves.
  • Incandescent Bulb Support:
This decoder can be used with 12 Volt bulbs.
  • Function Remapping:
Buttons 0 through 12 may be used to control the lighting functions of this decoder.
  • Programmable Lighting Effects:
Choose from 20 separate user-programmable lighting effects!
  • Dimmable Brightness:
Configure multiple different brightness levels for your LED's or incandescent bulbs.
  • Decoder Lock:
Feature which prevents accidental/unwanted programming while activated.
  • Airwire™ Compatible:
Fully compatible with Airwire™ operation.
  • User-Loadable Speed Tables:
Configure custom speed curves and set speed limits. SKU:  1674
$41.56
Add to cart
78910111213141516171819



How to install

You can now add layouts you create in the Shop Admin into any post or page. To make it simple a Shortcode Generator is included. You can access it via this button.

The first button is the shortcode genreator launcher and the second one ( the one with a plus ) ads a single audio player to the page from the media gallery.