Real estate

he LokPilot 5 Fx micro and its "twin" LokPilot 5 Fx micro DCC are versatile decoders with a Next18 interface on a footprint of 13.0mm x 9.2mm. They are used in all vehicles of nominal sizes N to H0, which do not have an engine output, but should still be able to switch light effects.

Modes

The LokPilot 5 Fx micro is a multi-protocol decoder. It masters the DCC data format as well as Motorola® and Selectrix®. In DCC format, 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses and up to 32 functions. With the help of RailComPlus® technology, the de-coders register fully automatically at a suitable digital center.It masters all DCC programming modes and can be both driven and programmed with compatible digital centers: Thanks to RailCom®, it is possible to read out the CV values on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.Motorola® users benefit from up to 28 driving steps at 255 addresses. Three additional Motorola® addresses enable the triggering of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.The LokPilot 5 Fx micro DCC speaks "only" the DCC protocol, but can also be automatically registered with RailComPlus® at appropriate control centers.The LokPilot 5 Fx micro decoder detects the Märklin® brake distances as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake blocks or with equal voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An automatic ABC pen train allows automatic commuting between two stations. Although this decoder does not have an engine output, this is also important for a function decoder in order to be able to synchronize control cars and motor cars.The LokPilot 5 Fx micro decoder can be used on analog DC and ac current webs; the LokPilot 5 Fx micro DCC on analog DC webs.The decoder switches "on-the-fly" fully automatically between operating modes. Most of the time, nothing needs to be adjusted.

Functions

The LokPilot 5 Fx micro or LokPilot 5 Fx micro DCC has been equipped with an astonishing number of function outputs. Thus, 6 reinforced function outputs with 180mA output current each as well as two logic level outputs for servos or Susi are available. The brightness of each output can be set separately.

Interaction

LokPilot 5 Fx micro are designed for interaction with the LokSound 5 and the LokPilot 5 decoders: for example, it is possible to equip the locomotive of a multiple unit with a LokSound 5 micro decoder and the control car with a LokPilot 5 Fx micro. Provided the same address, both are absolutely identical. The identical arrangement of the CVs facilitates the tuning of the two decoders.

SKU:  59128

Large scalers rejoice! The Blunami BLU-4408 The BLU-4408 is designed to wirelessly operate models with higher stall currents such as some S, O, and large scale locomotives; this decoder features easy-to-use terminal blocks for no-fault wiring and a higher audio amplifier for awesome volume, indoors or out. Blunami decoders can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! DYNAMIC DIGITAL EXHAUST  For added realism, you’ll love our reactive Dynamic Digital Exhaust (DDE) feature. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Tsunami2 the ability to create the most realistic experience possible. HIGH QUALITY SOUND LIBRARY Our large selection of high quality sound effects include:

• 10 Exhaust Chuffs
• Up to 12 Prime Movers in each sound profile
• Up to 12 Bells
• 90 Whistles
• 40+ Airhorns
• Additional couplers, dynamos, cab chatter and more!

ADDED REALISM Additional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more. EASY INSTALLATION No soldering required! This decoder features easy-to-use terminal blocks for no-fault wiring. This 4-amp, universal-style format decoder includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.

Dimensions:	69 x 30.5 x 14mm
Max. Motor Stall Current:	4A
Max. Function Current:	400mA (each output)
Function Outputs:	8
Audio Amplifier:	3 Watt, 8-Ohm Load
DCC Track Voltage:	7.5V – 26V
Sound Ch

Large scalers rejoice! The Blunami BLU-4408 The BLU-4408 is designed to wirelessly operate models with higher stall currents such as some S, O, and large scale locomotives; this decoder features easy-to-use terminal blocks for no-fault wiring and a higher audio amplifier for awesome volume, indoors or out. Blunami decoders can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! DYNAMIC DIGITAL EXHAUST  For added realism, you’ll love our reactive Dynamic Digital Exhaust (DDE) feature. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Tsunami2 the ability to create the most realistic experience possible. HIGH QUALITY SOUND LIBRARY Our large selection of high quality sound effects include:

• 10 Exhaust Chuffs
• Up to 12 Prime Movers in each sound profile
• Up to 12 Bells
• 90 Whistles
• 40+ Airhorns
• Additional couplers, dynamos, cab chatter and more!

ADDED REALISM Additional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more. EASY INSTALLATION No soldering required! This decoder features easy-to-use terminal blocks for no-fault wiring. This 4-amp, universal-style format decoder includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.

Dimensions:	69 x 30.5 x 14mm
Max. Motor Stall Current:	4A
Max. Function Current:	400mA (each output)
Function Outputs:	8
Audio Amplifier:	3 Watt, 8-Ohm Load
DCC Track Voltage:	7.5V – 26V
Sound Ch

Large scalers rejoice! The Blunami BLU-4408 The BLU-4408 is designed to wirelessly operate models with higher stall currents such as some S, O, and large scale locomotives; this decoder features easy-to-use terminal blocks for no-fault wiring and a higher audio amplifier for awesome volume, indoors or out. Blunami decoders can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! DYNAMIC DIGITAL EXHAUST  For added realism, you’ll love our reactive Dynamic Digital Exhaust (DDE) feature. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Tsunami2 the ability to create the most realistic experience possible. HIGH QUALITY SOUND LIBRARY Our large selection of high quality sound effects include:

• 10 Exhaust Chuffs
• Up to 12 Prime Movers in each sound profile
• Up to 12 Bells
• 90 Whistles
• 40+ Airhorns
• Additional couplers, dynamos, cab chatter and more!

ADDED REALISM Additional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more. EASY INSTALLATION No soldering required! This decoder features easy-to-use terminal blocks for no-fault wiring. This 4-amp, universal-style format decoder includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.

Dimensions:	69 x 30.5 x 14mm
Max. Motor Stall Current:	4A
Max. Function Current:	400mA (each output)
Function Outputs:	8
Audio Amplifier:	3 Watt, 8-Ohm Load
DCC Track Voltage:	7.5V – 26V
Sound Channels:

Large scalers rejoice! The Blunami BLU-4408 The BLU-4408 is designed to wirelessly operate models with higher stall currents such as some S, O, and large scale locomotives; this decoder features easy-to-use terminal blocks for no-fault wiring and a higher audio amplifier for awesome volume, indoors or out. Blunami decoders can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more! DYNAMIC DIGITAL EXHAUST  For added realism, you’ll love our reactive Dynamic Digital Exhaust (DDE) feature. When your locomotive is traveling across flat terrain and simply maintaining speed, you will hear your locomotive chugging along. But, when the locomotive encounters a grade and the engineer applies more throttle to get the train up the hill, the engine sounds will automatically react and reflect the increase of power needed to crest the hill. DDE accomplishes this by calculating the changes in strain or load on the motor and adjusting the exhaust to appropriately simulate the work the engineer would be doing to the throttle of the engine. This gives Tsunami2 the ability to create the most realistic experience possible. HIGH QUALITY SOUND LIBRARY Our large selection of high quality sound effects include:

• 10 Exhaust Chuffs
• Up to 12 Prime Movers in each sound profile
• Up to 12 Bells
• 90 Whistles
• 40+ Airhorns
• Additional couplers, dynamos, cab chatter and more!

ADDED REALISM Additional realism can be simulated by adding functioning locomotive and train brakes, injectors, power reverse, firebox flicker and more. EASY INSTALLATION No soldering required! This decoder features easy-to-use terminal blocks for no-fault wiring. This 4-amp, universal-style format decoder includes a connector to easily add a CurrentKeeper (P.N. 810140 or 810160) to maintain performance over dirty track and switches.

Dimensions:	69 x 30.5 x 14mm
Max. Motor Stall Current:	4A
Max. Function Current:	400mA (each output)
Function Outputs:	8
Audio Amplifier:	3 Watt, 8-Ohm Load
DCC Track Voltage:	7.5V – 26V
Sound Channels:	16