Supplies

Showing 1–52 of 512 results

Heat Guns (1)
Adhesives (17)
Batteries (11)
Capacitors (17)
Couplers (45)
Diodes & Rectifiers (9)
IC (Chips) (5)
Kapton Tape (3)
Lubricants (11)
Motors, Gears & Wheels (13)
Plastic (9)
Regulators (8)
Resistors (30)
Screws, Nuts, Washers (21)
Solder (4)
Switches and Relays (12)
Trucks, Wheels, & Gears (45)
#6 Ring Terminal, RED – #Terminal6RingRed
$0.10 Add to cart
#6 SPADE TERMINAL, RED – #Terminal6SpadeRed
$0.10 Add to cart
#8 RING TERMINAL, RED – #Terminal8RingRed
$0.10 Add to cart
#D-10A-100V Diode – Thru Hole-10A-100V – Digi-Key
$0.89 Add to cart
#D-4A-200V DIODE ULTRA FAST, Digi-Key
$0.86 Add to cart
#D-SMD Diode General Purpose SMD 50V 1A, Digi-Key
$0.39 Add to cart
#MTS-8 Switch DPDT ON-ON Mini Toggle – All Electronics
$1.69 Add to cart
#Ss2-5/32 Machine screws, Bolt Depot
$0.10 Add to cart
0-18V, 0-3 A Variable Benchtop Power Supply – SPECIAL ORDER – #PS9600
$79.95 Add to cart
0.1″ (2.54mm) Crimp Connector Housing: 1×2 Pin – #TVD-2PinCon
$0.05 Add to cart
1.0x4mm x 0.25 CROSS PAN head (8) – #053-1104-5
$0.79 Add to cart
1.2x4mm x 0.25 CROSS PAN head (8) – #053-1124-5
$0.79 Add to cart
1.4x6mm x 0.3 CROSS PAN head (8) – #053-1146-5
$0.79 Add to cart
1#ROLL 60/40 SOLDER.032DIA – #Solder1#
$32.96 Add to cart
10 position IDC socket, Box of 25 – #RRC-IDC-S10x25
$6.39 Add to cart
100k Ohm 2 Gang Linear Panel Mount Potentiometer Detent 1 Turn Carbon 0.125W, 1/8W PC Pins – #Pot-ESUXL
$2.95 Add to cart
12 VDC DPDT DIP RELAY – #RelayDPDT-12V
$4.89 Add to cart
12″ Extensions Set of 10 – #TVD-SRX112
$13.95 Add to cart
12″ Jumper Wires for Pin Headers and Terminal Blocks – #TVD-JMF001
$4.79 Add to cart
12″ Servo Y Extension Cord – #TVD-SRX003
$2.49 Add to cart
1200-YCB-01 HO Scale Caboose Lighting Kit with Yeloglo Lights from Miniatronics
$21.95 Add to cart
1254 CB 8-Pin NMRA plug, Ready for wires – #TCS-1254
$2.99 Add to cart
1260 9-Pin JST Connector T-series – #TCS-1260
$0.89 Add to cart
1261 7-Pin Micro-JST Connector – #TCS-1261
$0.69 Add to cart
1262 6-Pin JST Connector – #TCS-1262
$0.69 Add to cart
1301 2-Pin Mini Connector 7″ wires – #TCS-1301
$8.76 Add to cart
1309 6-Pin JST in Line Connector 6″ wires both ends – #TCS-1309
$5.79 Add to cart
1345 9-Pin JST Extension plug, 6″ wires – 5 pack – #TCS-1345
$21.39 Add to cart
1358 21-HW-5Pack, Circuit Board with NEM21 Socket and Solder Pads – #TCS-1358
$19.96 Add to cart
1362 T-3.5″ T Series harness with a NMRA plug which is rotated 180 degrees – #TCS-T-3.5″R
$7.96 Add to cart
1363 T-5″ is a 5″ harness for T series decoders – #TCS-T-5″
$7.96 Add to cart
1365 3.5″ United Kingdom harness for the T series – #TCS-T-3.5″UK
$7.96 Add to cart
1374 9 pin JST Female Socket (with pins inside) 5 pack – #TCS-1374
$16.76 Add to cart
14 Pin Connector – #JST-14Pin
$2.00 Add to cart
1411-4-Single Light HO Loco Drive Spring .008 wire, .079″ OD, .157 H
$0.30 Add to cart
1473 2-pin Micro Connector 6″ wires – #TCS-1473
$9.56 Add to cart
1475 4-Pin Micro Connector 6″ wires – #TCS-1475
$10.59 Add to cart
1476 6-Pin Micro Connector 6″ wires – #TCS-1476
$13.19 Add to cart
1477 6-Pin Micro Connector 6″ wires – #TCS-1477
$13.19 Add to cart
1483 – Analog Filter 1 (AF1) – #TCS-Analog Filter
$19.16 Add to cart
1490 7-Pin JST in Line Connector 6″ wires both ends – #TCS-1490
$6.59 Add to cart
1491 4-Pin Micro Connector 6″ wires – #TCS-1491
$10.59 Add to cart
1492 4-Pin Mini Connector 6″ wires – #TCS-1492
$9.59 Add to cart
150-55 Rail Joiners — Plastic Insulating pkg(24), Walthers
$1.89 Add to cart
1500 Watt Dual Temperature Heat Gun 572°/1112° – #HeatGun
$21.95 Add to cart
1544 motherboard replacement for the Bachmann light 4-8-2 with KA2 – #TCS-B-MB1
$29.56 Add to cart
1545 motherboard replacement for the Bachmann heavy 4-8-2 with KA2 – #TCS-B-MB2
$29.56 Add to cart
1546 motherboard replacement for the Bachmann 2-8-2 with KA2 – #TCS-B-MB3
$29.56 Add to cart
1557 Adapter Board for Bachmann Raymond 4-4-0, Required EU621 or WOW121 decoder – #TCS-B-MB4
$29.56 Add to cart
160-44547 Bachmann HO 44547 NS EZ Track Reversing System
$124.95 Add to cart
1616 Motherboard designed to replace original lighting board – #TCS-GEN-MB1
$39.96 Add to cart
1622 Motherboard for Atlas and Kato, includes KA2 Keep-Alive (TM) – #TCS-AK-MB1
$39.96 Add to cart

Heat Guns (1)

Adhesives (17)

Batteries (11)

Capacitors (17)

Couplers (45)

Diodes & Rectifiers (9)

IC (Chips) (5)

Kapton Tape (3)

Lubricants (11)

Motors, Gears & Wheels (13)

Plastic (9)

Regulators (8)

Resistors (30)

Screws, Nuts, Washers (21)

Solder (4)

Switches and Relays (12)

Trucks, Wheels, & Gears (45)

#6 Ring Terminal, RED – #Terminal6RingRed

#6 SPADE TERMINAL, RED – #Terminal6SpadeRed

#8 RING TERMINAL, RED – #Terminal8RingRed

#D-10A-100V Diode – Thru Hole-10A-100V – Digi-Key

#D-4A-200V DIODE ULTRA FAST, Digi-Key

#D-SMD Diode General Purpose SMD 50V 1A, Digi-Key

#MTS-8 Switch DPDT ON-ON Mini Toggle – All Electronics

#Ss2-5/32 Machine screws, Bolt Depot

0-18V, 0-3 A Variable Benchtop Power Supply – SPECIAL ORDER – #PS9600

0.1″ (2.54mm) Crimp Connector Housing: 1×2 Pin – #TVD-2PinCon

1.0x4mm x 0.25 CROSS PAN head (8) – #053-1104-5

1.2x4mm x 0.25 CROSS PAN head (8) – #053-1124-5

1.4x6mm x 0.3 CROSS PAN head (8) – #053-1146-5

1#ROLL 60/40 SOLDER.032DIA – #Solder1#

10 position IDC socket, Box of 25 – #RRC-IDC-S10x25

100k Ohm 2 Gang Linear Panel Mount Potentiometer Detent 1 Turn Carbon 0.125W, 1/8W PC Pins – #Pot-ESUXL

12 VDC DPDT DIP RELAY – #RelayDPDT-12V

12″ Extensions Set of 10 – #TVD-SRX112

12″ Jumper Wires for Pin Headers and Terminal Blocks – #TVD-JMF001

12″ Servo Y Extension Cord – #TVD-SRX003

1200-YCB-01 HO Scale Caboose Lighting Kit with Yeloglo Lights from Miniatronics

1254 CB 8-Pin NMRA plug, Ready for wires – #TCS-1254

1260 9-Pin JST Connector T-series – #TCS-1260

1261 7-Pin Micro-JST Connector – #TCS-1261

1262 6-Pin JST Connector – #TCS-1262

1301 2-Pin Mini Connector 7″ wires – #TCS-1301

1309 6-Pin JST in Line Connector 6″ wires both ends – #TCS-1309

1345 9-Pin JST Extension plug, 6″ wires – 5 pack – #TCS-1345

1358 21-HW-5Pack, Circuit Board with NEM21 Socket and Solder Pads – #TCS-1358

1362 T-3.5″ T Series harness with a NMRA plug which is rotated 180 degrees – #TCS-T-3.5″R

1363 T-5″ is a 5″ harness for T series decoders – #TCS-T-5″

1365 3.5″ United Kingdom harness for the T series – #TCS-T-3.5″UK

1374 9 pin JST Female Socket (with pins inside) 5 pack – #TCS-1374

14 Pin Connector – #JST-14Pin

1411-4-Single Light HO Loco Drive Spring .008 wire, .079″ OD, .157 H

1473 2-pin Micro Connector 6″ wires – #TCS-1473

1475 4-Pin Micro Connector 6″ wires – #TCS-1475

1476 6-Pin Micro Connector 6″ wires – #TCS-1476

1477 6-Pin Micro Connector 6″ wires – #TCS-1477

1483 – Analog Filter 1 (AF1) – #TCS-Analog Filter

1490 7-Pin JST in Line Connector 6″ wires both ends – #TCS-1490

1491 4-Pin Micro Connector 6″ wires – #TCS-1491

1492 4-Pin Mini Connector 6″ wires – #TCS-1492

150-55 Rail Joiners — Plastic Insulating pkg(24), Walthers

1500 Watt Dual Temperature Heat Gun 572°/1112° – #HeatGun

1544 motherboard replacement for the Bachmann light 4-8-2 with KA2 – #TCS-B-MB1

1545 motherboard replacement for the Bachmann heavy 4-8-2 with KA2 – #TCS-B-MB2

1546 motherboard replacement for the Bachmann 2-8-2 with KA2 – #TCS-B-MB3

1557 Adapter Board for Bachmann Raymond 4-4-0, Required EU621 or WOW121 decoder – #TCS-B-MB4

160-44547 Bachmann HO 44547 NS EZ Track Reversing System

1616 Motherboard designed to replace original lighting board – #TCS-GEN-MB1

1622 Motherboard for Atlas and Kato, includes KA2 Keep-Alive (TM) – #TCS-AK-MB1