Home » Test Equipment » DCC decoder tester by ESU

DCC decoder tester by ESU

DCC decoder tester by ESU
 
(0 reviews)  

Stock Number
397-51900
Weight
0.70 lbs
Our price:
US $44.95
Qty
The Profi-Tester comes with useful features: To connect the decoder, there is a 6-wire NEM 651 harness and an 8-wire NEM 652 interface, as well as a 21-pin mtc-Interface available. Plug it on – bingo! Locos without an interface board can be hooked up with alligator clips.

A high quality, 5 pole skewed armature can motor with flywheel serves to check the motor output: It’s this simple to test the slow-, and constant speed characteristics of your decoder. A LED-monitor informs you about the function of the head-, and rear light output, as well as function outputs AUX 1 (green), and AUX 2 (violet).

A 20 mm (100 ohm) loud speaker is included for testing LokSound-Decoders. A screw terminal assures safe connection between your Profi-Tester and the Digital central station-, or LokProgrammer. Due to its sensible features and simple handling, the Profi-Tester will soon become an indispensable helper in your shop.

: *
: *
: *
 
Wire 30 AWG Kit - 10 feet of each of the 9 basic DCC colors
Wire 30 AWG Kit - 10 feet of each of the 9 basic DCC colors
US $11.99
Shrink Tubing for your DCC install
Shrink Tubing for your DCC install
US $1.49
Kapton Tape
Kapton Tape
US $2.50
Z DCC decoder basic by Digitrax DZ123 series
Z DCC decoder basic by Digitrax DZ123 series
US $13.95
Loksound Select Direct
Loksound Select Direct
US $85.99
Tortoise switch motor connector with 8 posistion wiring block
Tortoise switch motor connector with 8 posistion wiring block
US $4.95
Loksound Select
Loksound Select
US $79.99
Eco-100 Econami™ Digital Sound Decoders
Eco-100 Econami™ Digital Sound Decoders
US $63.96
2mm 12 Volt  LEDs
2mm 12 Volt LEDs
US $0.49
There have been no reviews