NCE Power Cab DCC System – #524-PowerCab – TEMPORARILY OUT OF STOCK
The PowerCab is a
DCC starter set – up to 2 amps
DCC Cab to use on other NCE layouts
As a DCC Starter set, PowerCab provides 1.7 amp nominal current with 2 amp maximum current to the rails and allows control of up to four trains, using one to three ProCabs or Engineer Cabs
The PowerCab has virtually all of the features of the ProCab and can be used on any NCE layout, with the included coiled cord.
On the workbench, the PowerCab allows you to monitor current draw by your locomotives and program any decoder now on the market without cumbersome and expensive programming track boosters! With the NCE USB interface, you can use your computer and DecoderPro to maintain your locomotive data files.
When you are using the PowerCab on a small layout, Mr. DCC recommends the AutoSW auto-switch to isolate the programming track function from the layout, preventing accidental reprogramming of all the locos on the layout. He also recommends the throttle pocket shown in RELATED PRODUCTS below to hold it! The AutoSW also works with the Digitrax Zephyr.
With an extra PCP and P114 or P214 you can easily move your PowerCab from the workbench to the layout, or between layouts.