NCE 524234 Universal Throttle Panel (UTP) CAT5 Fascia Panel – #524-UTP-CAT5

Same six-wire connectors in front as UTP but allows use of off-the-shelf CAT5 cables to connect panel-to-panel at rear. Can be used as a cab bus splitter, and also adds the abilty to add power to the cab bus for larger layouts.

{The UTP cab bus panel provides a low cost means of adding walk around capability to your layout. The panel has 4 RJ-12 connectors wired in parallel, two on the front and two on the rear. Your cab bus can be “daisy chained” from one panel to the next using the rear connectors. One or two cabs can then be plugged in to the front connectors.}

The UTP-CAT 5 Panel has the same six-wire connectors in the front as the UTP, but allows use of off-the-shelf CAT5 cables to connect panel-to-panel at rear.

CAT5 cable allows for longer cable runs with less voltage drop than conventional 6-conductor cable.

Includes

• 1/16″ thick aluminum, black anodized fascia plate
• Two RJ-12 & two RJ-45 jacks are wired in parallel for easy plug and play use.
• Provides a convenient point to add additional 12 Volt cab bus power, just plug in a 12 Volt “wall wart” power supply.